Merge branch 'master' of http://git.1473.cn/root/UseStudio.CampusInfo-borwers

resources/app/node_modules/.bin/electron

@@ -6,10 +6,10 @@ case `uname` in
 esac
 
 if [ -x "$basedir/node" ]; then
-  "$basedir/node"  "$basedir/../electron/cli.js" "$@"
+  "$basedir/node"  "$basedir/../electron-prebuilt/cli.js" "$@"
   ret=$?
 else 
-  node  "$basedir/../electron/cli.js" "$@"
+  node  "$basedir/../electron-prebuilt/cli.js" "$@"
   ret=$?
 fi
 exit $ret

resources/app/node_modules/.bin/electron.cmd

@@ -1,7 +1,7 @@
 @IF EXIST "%~dp0\node.exe" (
-  "%~dp0\node.exe"  "%~dp0\..\electron\cli.js" %*
+  "%~dp0\node.exe"  "%~dp0\..\electron-prebuilt\cli.js" %*
 ) ELSE (
   @SETLOCAL
   @SET PATHEXT=%PATHEXT:;.JS;=;%
-  node  "%~dp0\..\electron\cli.js" %*
+  node  "%~dp0\..\electron-prebuilt\cli.js" %*
 )

resources/app/node_modules/@types/node/LICENSE

@@ -1,21 +0,0 @@
-    MIT License
-
-    Copyright (c) Microsoft Corporation. All rights reserved.
-
-    Permission is hereby granted, free of charge, to any person obtaining a copy
-    of this software and associated documentation files (the "Software"), to deal
-    in the Software without restriction, including without limitation the rights
-    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-    copies of the Software, and to permit persons to whom the Software is
-    furnished to do so, subject to the following conditions:
-
-    The above copyright notice and this permission notice shall be included in all
-    copies or substantial portions of the Software.
-
-    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-    SOFTWARE

resources/app/node_modules/@types/node/package.json

@@ -1,123 +0,0 @@
-{
-  "_from": "@types/node@^8.0.24",
-  "_id": "@types/node@8.10.7",
-  "_inBundle": false,
-  "_integrity": "sha512-5QC0YAHH7aXzrrbgQ+faSeBKbJwTaUyYuaywYzDTr1Myz5C0knx5FHOV5QyhBeE1x8n2xfkBUGE/C0X1paLp+Q==",
-  "_location": "/@types/node",
-  "_phantomChildren": {},
-  "_requested": {
-    "type": "range",
-    "registry": true,
-    "raw": "@types/node@^8.0.24",
-    "name": "@types/node",
-    "escapedName": "@types%2fnode",
-    "scope": "@types",
-    "rawSpec": "^8.0.24",
-    "saveSpec": null,
-    "fetchSpec": "^8.0.24"
-  },
-  "_requiredBy": [
-    "/electron"
-  ],
-  "_resolved": "https://registry.npmjs.org/@types/node/-/node-8.10.7.tgz",
-  "_shasum": "40c0058c115bd42ee9bf35d7a217eeef1acd2716",
-  "_spec": "@types/node@^8.0.24",
-  "_where": "E:\\vscode\\UseStudio.Desktop\\resources\\app\\node_modules\\electron",
-  "bundleDependencies": false,
-  "contributors": [
-    {
-      "name": "Microsoft TypeScript",
-      "url": "http://typescriptlang.org"
-    },
-    {
-      "name": "DefinitelyTyped",
-      "url": "https://github.com/DefinitelyTyped/DefinitelyTyped"
-    },
-    {
-      "name": "Parambir Singh",
-      "url": "https://github.com/parambirs"
-    },
-    {
-      "name": "Christian Vaagland Tellnes",
-      "url": "https://github.com/tellnes"
-    },
-    {
-      "name": "Wilco Bakker",
-      "url": "https://github.com/WilcoBakker"
-    },
-    {
-      "name": "Nicolas Voigt",
-      "url": "https://github.com/octo-sniffle"
-    },
-    {
-      "name": "Chigozirim C.",
-      "url": "https://github.com/smac89"
-    },
-    {
-      "name": "Flarna",
-      "url": "https://github.com/Flarna"
-    },
-    {
-      "name": "Mariusz Wiktorczyk",
-      "url": "https://github.com/mwiktorczyk"
-    },
-    {
-      "name": "wwwy3y3",
-      "url": "https://github.com/wwwy3y3"
-    },
-    {
-      "name": "Deividas Bakanas",
-      "url": "https://github.com/DeividasBakanas"
-    },
-    {
-      "name": "Kelvin Jin",
-      "url": "https://github.com/kjin"
-    },
-    {
-      "name": "Alvis HT Tang",
-      "url": "https://github.com/alvis"
-    },
-    {
-      "name": "Oliver Joseph Ash",
-      "url": "https://github.com/OliverJAsh"
-    },
-    {
-      "name": "Sebastian Silbermann",
-      "url": "https://github.com/eps1lon"
-    },
-    {
-      "name": "Hannes Magnusson",
-      "url": "https://github.com/Hannes-Magnusson-CK"
-    },
-    {
-      "name": "Alberto Schiabel",
-      "url": "https://github.com/jkomyno"
-    },
-    {
-      "name": "Huw",
-      "url": "https://github.com/hoo29"
-    },
-    {
-      "name": "Nicolas Even",
-      "url": "https://github.com/n-e"
-    },
-    {
-      "name": "Hoàng Văn Khải",
-      "url": "https://github.com/KSXGitHub"
-    }
-  ],
-  "dependencies": {},
-  "deprecated": false,
-  "description": "TypeScript definitions for Node.js",
-  "license": "MIT",
-  "main": "",
-  "name": "@types/node",
-  "repository": {
-    "type": "git",
-    "url": "https://www.github.com/DefinitelyTyped/DefinitelyTyped.git"
-  },
-  "scripts": {},
-  "typeScriptVersion": "2.1",
-  "typesPublisherContentHash": "b58b6f23fe1dc8db77712c5c5d2037be72a7065b53b3ec95cd64421b3262f890",
-  "version": "8.10.7"
-}

resources/app/node_modules/decompress-zip/node_modules/readable-stream/.npmignore

@@ -0,0 +1,5 @@
+build/
+test/
+examples/
+fs.js
+zlib.js

resources/app/node_modules/decompress-zip/node_modules/readable-stream/LICENSE

@@ -0,0 +1,18 @@
+Copyright Joyent, Inc. and other Node contributors. All rights reserved.
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to
+deal in the Software without restriction, including without limitation the
+rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+sell copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+IN THE SOFTWARE.

resources/app/node_modules/decompress-zip/node_modules/readable-stream/README.md

@@ -0,0 +1,15 @@
+# readable-stream
+
+***Node-core streams for userland***
+
+[![NPM](https://nodei.co/npm/readable-stream.png?downloads=true&downloadRank=true)](https://nodei.co/npm/readable-stream/)
+[![NPM](https://nodei.co/npm-dl/readable-stream.png&months=6&height=3)](https://nodei.co/npm/readable-stream/)
+
+This package is a mirror of the Streams2 and Streams3 implementations in Node-core.
+
+If you want to guarantee a stable streams base, regardless of what version of Node you, or the users of your libraries are using, use **readable-stream** *only* and avoid the *"stream"* module in Node-core.
+
+**readable-stream** comes in two major versions, v1.0.x and v1.1.x. The former tracks the Streams2 implementation in Node 0.10, including bug-fixes and minor improvements as they are added. The latter tracks Streams3 as it develops in Node 0.11; we will likely see a v1.2.x branch for Node 0.12.
+
+**readable-stream** uses proper patch-level versioning so if you pin to `"~1.0.0"` you’ll get the latest Node 0.10 Streams2 implementation, including any fixes and minor non-breaking improvements. The patch-level versions of 1.0.x and 1.1.x should mirror the patch-level versions of Node-core releases. You should prefer the **1.0.x** releases for now and when you’re ready to start using Streams3, pin to `"~1.1.0"`
+

resources/app/node_modules/decompress-zip/node_modules/readable-stream/duplex.js

@@ -0,0 +1 @@
+module.exports = require("./lib/_stream_duplex.js")

resources/app/node_modules/decompress-zip/node_modules/readable-stream/float.patch

@@ -0,0 +1,923 @@
+diff --git a/lib/_stream_duplex.js b/lib/_stream_duplex.js
+index c5a741c..a2e0d8e 100644
+--- a/lib/_stream_duplex.js
++++ b/lib/_stream_duplex.js
+@@ -26,8 +26,8 @@
+ 
+ module.exports = Duplex;
+ var util = require('util');
+-var Readable = require('_stream_readable');
+-var Writable = require('_stream_writable');
++var Readable = require('./_stream_readable');
++var Writable = require('./_stream_writable');
+ 
+ util.inherits(Duplex, Readable);
+ 
+diff --git a/lib/_stream_passthrough.js b/lib/_stream_passthrough.js
+index a5e9864..330c247 100644
+--- a/lib/_stream_passthrough.js
++++ b/lib/_stream_passthrough.js
+@@ -25,7 +25,7 @@
+ 
+ module.exports = PassThrough;
+ 
+-var Transform = require('_stream_transform');
++var Transform = require('./_stream_transform');
+ var util = require('util');
+ util.inherits(PassThrough, Transform);
+ 
+diff --git a/lib/_stream_readable.js b/lib/_stream_readable.js
+index 0c3fe3e..90a8298 100644
+--- a/lib/_stream_readable.js
++++ b/lib/_stream_readable.js
+@@ -23,10 +23,34 @@ module.exports = Readable;
+ Readable.ReadableState = ReadableState;
+ 
+ var EE = require('events').EventEmitter;
++if (!EE.listenerCount) EE.listenerCount = function(emitter, type) {
++  return emitter.listeners(type).length;
++};
++
++if (!global.setImmediate) global.setImmediate = function setImmediate(fn) {
++  return setTimeout(fn, 0);
++};
++if (!global.clearImmediate) global.clearImmediate = function clearImmediate(i) {
++  return clearTimeout(i);
++};
++
+ var Stream = require('stream');
+ var util = require('util');
++if (!util.isUndefined) {
++  var utilIs = require('core-util-is');
++  for (var f in utilIs) {
++    util[f] = utilIs[f];
++  }
++}
+ var StringDecoder;
+-var debug = util.debuglog('stream');
++var debug;
++if (util.debuglog)
++  debug = util.debuglog('stream');
++else try {
++  debug = require('debuglog')('stream');
++} catch (er) {
++  debug = function() {};
++}
+ 
+ util.inherits(Readable, Stream);
+ 
+@@ -380,7 +404,7 @@ function chunkInvalid(state, chunk) {
+ 
+ 
+ function onEofChunk(stream, state) {
+-  if (state.decoder && !state.ended) {
++  if (state.decoder && !state.ended && state.decoder.end) {
+     var chunk = state.decoder.end();
+     if (chunk && chunk.length) {
+       state.buffer.push(chunk);
+diff --git a/lib/_stream_transform.js b/lib/_stream_transform.js
+index b1f9fcc..b0caf57 100644
+--- a/lib/_stream_transform.js
++++ b/lib/_stream_transform.js
+@@ -64,8 +64,14 @@
+ 
+ module.exports = Transform;
+ 
+-var Duplex = require('_stream_duplex');
++var Duplex = require('./_stream_duplex');
+ var util = require('util');
++if (!util.isUndefined) {
++  var utilIs = require('core-util-is');
++  for (var f in utilIs) {
++    util[f] = utilIs[f];
++  }
++}
+ util.inherits(Transform, Duplex);
+ 
+ 
+diff --git a/lib/_stream_writable.js b/lib/_stream_writable.js
+index ba2e920..f49288b 100644
+--- a/lib/_stream_writable.js
++++ b/lib/_stream_writable.js
+@@ -27,6 +27,12 @@ module.exports = Writable;
+ Writable.WritableState = WritableState;
+ 
+ var util = require('util');
++if (!util.isUndefined) {
++  var utilIs = require('core-util-is');
++  for (var f in utilIs) {
++    util[f] = utilIs[f];
++  }
++}
+ var Stream = require('stream');
+ 
+ util.inherits(Writable, Stream);
+@@ -119,7 +125,7 @@ function WritableState(options, stream) {
+ function Writable(options) {
+   // Writable ctor is applied to Duplexes, though they're not
+   // instanceof Writable, they're instanceof Readable.
+-  if (!(this instanceof Writable) && !(this instanceof Stream.Duplex))
++  if (!(this instanceof Writable) && !(this instanceof require('./_stream_duplex')))
+     return new Writable(options);
+ 
+   this._writableState = new WritableState(options, this);
+diff --git a/test/simple/test-stream-big-push.js b/test/simple/test-stream-big-push.js
+index e3787e4..8cd2127 100644
+--- a/test/simple/test-stream-big-push.js
++++ b/test/simple/test-stream-big-push.js
+@@ -21,7 +21,7 @@
+ 
+ var common = require('../common');
+ var assert = require('assert');
+-var stream = require('stream');
++var stream = require('../../');
+ var str = 'asdfasdfasdfasdfasdf';
+ 
+ var r = new stream.Readable({
+diff --git a/test/simple/test-stream-end-paused.js b/test/simple/test-stream-end-paused.js
+index bb73777..d40efc7 100644
+--- a/test/simple/test-stream-end-paused.js
++++ b/test/simple/test-stream-end-paused.js
+@@ -25,7 +25,7 @@ var gotEnd = false;
+ 
+ // Make sure we don't miss the end event for paused 0-length streams
+ 
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ var stream = new Readable();
+ var calledRead = false;
+ stream._read = function() {
+diff --git a/test/simple/test-stream-pipe-after-end.js b/test/simple/test-stream-pipe-after-end.js
+index b46ee90..0be8366 100644
+--- a/test/simple/test-stream-pipe-after-end.js
++++ b/test/simple/test-stream-pipe-after-end.js
+@@ -22,8 +22,8 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var Readable = require('_stream_readable');
+-var Writable = require('_stream_writable');
++var Readable = require('../../lib/_stream_readable');
++var Writable = require('../../lib/_stream_writable');
+ var util = require('util');
+ 
+ util.inherits(TestReadable, Readable);
+diff --git a/test/simple/test-stream-pipe-cleanup.js b/test/simple/test-stream-pipe-cleanup.js
+deleted file mode 100644
+index f689358..0000000
+--- a/test/simple/test-stream-pipe-cleanup.js
++++ /dev/null
+@@ -1,122 +0,0 @@
+-// Copyright Joyent, Inc. and other Node contributors.
+-//
+-// Permission is hereby granted, free of charge, to any person obtaining a
+-// copy of this software and associated documentation files (the
+-// "Software"), to deal in the Software without restriction, including
+-// without limitation the rights to use, copy, modify, merge, publish,
+-// distribute, sublicense, and/or sell copies of the Software, and to permit
+-// persons to whom the Software is furnished to do so, subject to the
+-// following conditions:
+-//
+-// The above copyright notice and this permission notice shall be included
+-// in all copies or substantial portions of the Software.
+-//
+-// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+-// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+-// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+-// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+-// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+-// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+-// USE OR OTHER DEALINGS IN THE SOFTWARE.
+-
+-// This test asserts that Stream.prototype.pipe does not leave listeners
+-// hanging on the source or dest.
+-
+-var common = require('../common');
+-var stream = require('stream');
+-var assert = require('assert');
+-var util = require('util');
+-
+-function Writable() {
+-  this.writable = true;
+-  this.endCalls = 0;
+-  stream.Stream.call(this);
+-}
+-util.inherits(Writable, stream.Stream);
+-Writable.prototype.end = function() {
+-  this.endCalls++;
+-};
+-
+-Writable.prototype.destroy = function() {
+-  this.endCalls++;
+-};
+-
+-function Readable() {
+-  this.readable = true;
+-  stream.Stream.call(this);
+-}
+-util.inherits(Readable, stream.Stream);
+-
+-function Duplex() {
+-  this.readable = true;
+-  Writable.call(this);
+-}
+-util.inherits(Duplex, Writable);
+-
+-var i = 0;
+-var limit = 100;
+-
+-var w = new Writable();
+-
+-var r;
+-
+-for (i = 0; i < limit; i++) {
+-  r = new Readable();
+-  r.pipe(w);
+-  r.emit('end');
+-}
+-assert.equal(0, r.listeners('end').length);
+-assert.equal(limit, w.endCalls);
+-
+-w.endCalls = 0;
+-
+-for (i = 0; i < limit; i++) {
+-  r = new Readable();
+-  r.pipe(w);
+-  r.emit('close');
+-}
+-assert.equal(0, r.listeners('close').length);
+-assert.equal(limit, w.endCalls);
+-
+-w.endCalls = 0;
+-
+-r = new Readable();
+-
+-for (i = 0; i < limit; i++) {
+-  w = new Writable();
+-  r.pipe(w);
+-  w.emit('close');
+-}
+-assert.equal(0, w.listeners('close').length);
+-
+-r = new Readable();
+-w = new Writable();
+-var d = new Duplex();
+-r.pipe(d); // pipeline A
+-d.pipe(w); // pipeline B
+-assert.equal(r.listeners('end').length, 2);   // A.onend, A.cleanup
+-assert.equal(r.listeners('close').length, 2); // A.onclose, A.cleanup
+-assert.equal(d.listeners('end').length, 2);   // B.onend, B.cleanup
+-assert.equal(d.listeners('close').length, 3); // A.cleanup, B.onclose, B.cleanup
+-assert.equal(w.listeners('end').length, 0);
+-assert.equal(w.listeners('close').length, 1); // B.cleanup
+-
+-r.emit('end');
+-assert.equal(d.endCalls, 1);
+-assert.equal(w.endCalls, 0);
+-assert.equal(r.listeners('end').length, 0);
+-assert.equal(r.listeners('close').length, 0);
+-assert.equal(d.listeners('end').length, 2);   // B.onend, B.cleanup
+-assert.equal(d.listeners('close').length, 2); // B.onclose, B.cleanup
+-assert.equal(w.listeners('end').length, 0);
+-assert.equal(w.listeners('close').length, 1); // B.cleanup
+-
+-d.emit('end');
+-assert.equal(d.endCalls, 1);
+-assert.equal(w.endCalls, 1);
+-assert.equal(r.listeners('end').length, 0);
+-assert.equal(r.listeners('close').length, 0);
+-assert.equal(d.listeners('end').length, 0);
+-assert.equal(d.listeners('close').length, 0);
+-assert.equal(w.listeners('end').length, 0);
+-assert.equal(w.listeners('close').length, 0);
+diff --git a/test/simple/test-stream-pipe-error-handling.js b/test/simple/test-stream-pipe-error-handling.js
+index c5d724b..c7d6b7d 100644
+--- a/test/simple/test-stream-pipe-error-handling.js
++++ b/test/simple/test-stream-pipe-error-handling.js
+@@ -21,7 +21,7 @@
+ 
+ var common = require('../common');
+ var assert = require('assert');
+-var Stream = require('stream').Stream;
++var Stream = require('../../').Stream;
+ 
+ (function testErrorListenerCatches() {
+   var source = new Stream();
+diff --git a/test/simple/test-stream-pipe-event.js b/test/simple/test-stream-pipe-event.js
+index cb9d5fe..56f8d61 100644
+--- a/test/simple/test-stream-pipe-event.js
++++ b/test/simple/test-stream-pipe-event.js
+@@ -20,7 +20,7 @@
+ // USE OR OTHER DEALINGS IN THE SOFTWARE.
+ 
+ var common = require('../common');
+-var stream = require('stream');
++var stream = require('../../');
+ var assert = require('assert');
+ var util = require('util');
+ 
+diff --git a/test/simple/test-stream-push-order.js b/test/simple/test-stream-push-order.js
+index f2e6ec2..a5c9bf9 100644
+--- a/test/simple/test-stream-push-order.js
++++ b/test/simple/test-stream-push-order.js
+@@ -20,7 +20,7 @@
+ // USE OR OTHER DEALINGS IN THE SOFTWARE.
+ 
+ var common = require('../common.js');
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ var assert = require('assert');
+ 
+ var s = new Readable({
+diff --git a/test/simple/test-stream-push-strings.js b/test/simple/test-stream-push-strings.js
+index 06f43dc..1701a9a 100644
+--- a/test/simple/test-stream-push-strings.js
++++ b/test/simple/test-stream-push-strings.js
+@@ -22,7 +22,7 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ var util = require('util');
+ 
+ util.inherits(MyStream, Readable);
+diff --git a/test/simple/test-stream-readable-event.js b/test/simple/test-stream-readable-event.js
+index ba6a577..a8e6f7b 100644
+--- a/test/simple/test-stream-readable-event.js
++++ b/test/simple/test-stream-readable-event.js
+@@ -22,7 +22,7 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ 
+ (function first() {
+   // First test, not reading when the readable is added.
+diff --git a/test/simple/test-stream-readable-flow-recursion.js b/test/simple/test-stream-readable-flow-recursion.js
+index 2891ad6..11689ba 100644
+--- a/test/simple/test-stream-readable-flow-recursion.js
++++ b/test/simple/test-stream-readable-flow-recursion.js
+@@ -27,7 +27,7 @@ var assert = require('assert');
+ // more data continuously, but without triggering a nextTick
+ // warning or RangeError.
+ 
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ 
+ // throw an error if we trigger a nextTick warning.
+ process.throwDeprecation = true;
+diff --git a/test/simple/test-stream-unshift-empty-chunk.js b/test/simple/test-stream-unshift-empty-chunk.js
+index 0c96476..7827538 100644
+--- a/test/simple/test-stream-unshift-empty-chunk.js
++++ b/test/simple/test-stream-unshift-empty-chunk.js
+@@ -24,7 +24,7 @@ var assert = require('assert');
+ 
+ // This test verifies that stream.unshift(Buffer(0)) or 
+ // stream.unshift('') does not set state.reading=false.
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ 
+ var r = new Readable();
+ var nChunks = 10;
+diff --git a/test/simple/test-stream-unshift-read-race.js b/test/simple/test-stream-unshift-read-race.js
+index 83fd9fa..17c18aa 100644
+--- a/test/simple/test-stream-unshift-read-race.js
++++ b/test/simple/test-stream-unshift-read-race.js
+@@ -29,7 +29,7 @@ var assert = require('assert');
+ // 3. push() after the EOF signaling null is an error.
+ // 4. _read() is not called after pushing the EOF null chunk.
+ 
+-var stream = require('stream');
++var stream = require('../../');
+ var hwm = 10;
+ var r = stream.Readable({ highWaterMark: hwm });
+ var chunks = 10;
+@@ -51,7 +51,14 @@ r._read = function(n) {
+ 
+   function push(fast) {
+     assert(!pushedNull, 'push() after null push');
+-    var c = pos >= data.length ? null : data.slice(pos, pos + n);
++    var c;
++    if (pos >= data.length)
++      c = null;
++    else {
++      if (n + pos > data.length)
++        n = data.length - pos;
++      c = data.slice(pos, pos + n);
++    }
+     pushedNull = c === null;
+     if (fast) {
+       pos += n;
+diff --git a/test/simple/test-stream-writev.js b/test/simple/test-stream-writev.js
+index 5b49e6e..b5321f3 100644
+--- a/test/simple/test-stream-writev.js
++++ b/test/simple/test-stream-writev.js
+@@ -22,7 +22,7 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var stream = require('stream');
++var stream = require('../../');
+ 
+ var queue = [];
+ for (var decode = 0; decode < 2; decode++) {
+diff --git a/test/simple/test-stream2-basic.js b/test/simple/test-stream2-basic.js
+index 3814bf0..248c1be 100644
+--- a/test/simple/test-stream2-basic.js
++++ b/test/simple/test-stream2-basic.js
+@@ -21,7 +21,7 @@
+ 
+ 
+ var common = require('../common.js');
+-var R = require('_stream_readable');
++var R = require('../../lib/_stream_readable');
+ var assert = require('assert');
+ 
+ var util = require('util');
+diff --git a/test/simple/test-stream2-compatibility.js b/test/simple/test-stream2-compatibility.js
+index 6cdd4e9..f0fa84b 100644
+--- a/test/simple/test-stream2-compatibility.js
++++ b/test/simple/test-stream2-compatibility.js
+@@ -21,7 +21,7 @@
+ 
+ 
+ var common = require('../common.js');
+-var R = require('_stream_readable');
++var R = require('../../lib/_stream_readable');
+ var assert = require('assert');
+ 
+ var util = require('util');
+diff --git a/test/simple/test-stream2-finish-pipe.js b/test/simple/test-stream2-finish-pipe.js
+index 39b274f..006a19b 100644
+--- a/test/simple/test-stream2-finish-pipe.js
++++ b/test/simple/test-stream2-finish-pipe.js
+@@ -20,7 +20,7 @@
+ // USE OR OTHER DEALINGS IN THE SOFTWARE.
+ 
+ var common = require('../common.js');
+-var stream = require('stream');
++var stream = require('../../');
+ var Buffer = require('buffer').Buffer;
+ 
+ var r = new stream.Readable();
+diff --git a/test/simple/test-stream2-fs.js b/test/simple/test-stream2-fs.js
+deleted file mode 100644
+index e162406..0000000
+--- a/test/simple/test-stream2-fs.js
++++ /dev/null
+@@ -1,72 +0,0 @@
+-// Copyright Joyent, Inc. and other Node contributors.
+-//
+-// Permission is hereby granted, free of charge, to any person obtaining a
+-// copy of this software and associated documentation files (the
+-// "Software"), to deal in the Software without restriction, including
+-// without limitation the rights to use, copy, modify, merge, publish,
+-// distribute, sublicense, and/or sell copies of the Software, and to permit
+-// persons to whom the Software is furnished to do so, subject to the
+-// following conditions:
+-//
+-// The above copyright notice and this permission notice shall be included
+-// in all copies or substantial portions of the Software.
+-//
+-// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+-// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+-// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+-// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+-// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+-// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+-// USE OR OTHER DEALINGS IN THE SOFTWARE.
+-
+-
+-var common = require('../common.js');
+-var R = require('_stream_readable');
+-var assert = require('assert');
+-
+-var fs = require('fs');
+-var FSReadable = fs.ReadStream;
+-
+-var path = require('path');
+-var file = path.resolve(common.fixturesDir, 'x1024.txt');
+-
+-var size = fs.statSync(file).size;
+-
+-var expectLengths = [1024];
+-
+-var util = require('util');
+-var Stream = require('stream');
+-
+-util.inherits(TestWriter, Stream);
+-
+-function TestWriter() {
+-  Stream.apply(this);
+-  this.buffer = [];
+-  this.length = 0;
+-}
+-
+-TestWriter.prototype.write = function(c) {
+-  this.buffer.push(c.toString());
+-  this.length += c.length;
+-  return true;
+-};
+-
+-TestWriter.prototype.end = function(c) {
+-  if (c) this.buffer.push(c.toString());
+-  this.emit('results', this.buffer);
+-}
+-
+-var r = new FSReadable(file);
+-var w = new TestWriter();
+-
+-w.on('results', function(res) {
+-  console.error(res, w.length);
+-  assert.equal(w.length, size);
+-  var l = 0;
+-  assert.deepEqual(res.map(function (c) {
+-    return c.length;
+-  }), expectLengths);
+-  console.log('ok');
+-});
+-
+-r.pipe(w);
+diff --git a/test/simple/test-stream2-httpclient-response-end.js b/test/simple/test-stream2-httpclient-response-end.js
+deleted file mode 100644
+index 15cffc2..0000000
+--- a/test/simple/test-stream2-httpclient-response-end.js
++++ /dev/null
+@@ -1,52 +0,0 @@
+-// Copyright Joyent, Inc. and other Node contributors.
+-//
+-// Permission is hereby granted, free of charge, to any person obtaining a
+-// copy of this software and associated documentation files (the
+-// "Software"), to deal in the Software without restriction, including
+-// without limitation the rights to use, copy, modify, merge, publish,
+-// distribute, sublicense, and/or sell copies of the Software, and to permit
+-// persons to whom the Software is furnished to do so, subject to the
+-// following conditions:
+-//
+-// The above copyright notice and this permission notice shall be included
+-// in all copies or substantial portions of the Software.
+-//
+-// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+-// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+-// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+-// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+-// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+-// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+-// USE OR OTHER DEALINGS IN THE SOFTWARE.
+-
+-var common = require('../common.js');
+-var assert = require('assert');
+-var http = require('http');
+-var msg = 'Hello';
+-var readable_event = false;
+-var end_event = false;
+-var server = http.createServer(function(req, res) {
+-  res.writeHead(200, {'Content-Type': 'text/plain'});
+-  res.end(msg);
+-}).listen(common.PORT, function() {
+-  http.get({port: common.PORT}, function(res) {
+-    var data = '';
+-    res.on('readable', function() {
+-      console.log('readable event');
+-      readable_event = true;
+-      data += res.read();
+-    });
+-    res.on('end', function() {
+-      console.log('end event');
+-      end_event = true;
+-      assert.strictEqual(msg, data);
+-      server.close();
+-    });
+-  });
+-});
+-
+-process.on('exit', function() {
+-  assert(readable_event);
+-  assert(end_event);
+-});
+-
+diff --git a/test/simple/test-stream2-large-read-stall.js b/test/simple/test-stream2-large-read-stall.js
+index 2fbfbca..667985b 100644
+--- a/test/simple/test-stream2-large-read-stall.js
++++ b/test/simple/test-stream2-large-read-stall.js
+@@ -30,7 +30,7 @@ var PUSHSIZE = 20;
+ var PUSHCOUNT = 1000;
+ var HWM = 50;
+ 
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ var r = new Readable({
+   highWaterMark: HWM
+ });
+@@ -39,23 +39,23 @@ var rs = r._readableState;
+ r._read = push;
+ 
+ r.on('readable', function() {
+-  console.error('>> readable');
++  //console.error('>> readable');
+   do {
+-    console.error('  > read(%d)', READSIZE);
++    //console.error('  > read(%d)', READSIZE);
+     var ret = r.read(READSIZE);
+-    console.error('  < %j (%d remain)', ret && ret.length, rs.length);
++    //console.error('  < %j (%d remain)', ret && ret.length, rs.length);
+   } while (ret && ret.length === READSIZE);
+ 
+-  console.error('<< after read()',
+-                ret && ret.length,
+-                rs.needReadable,
+-                rs.length);
++  //console.error('<< after read()',
++  //              ret && ret.length,
++  //              rs.needReadable,
++  //              rs.length);
+ });
+ 
+ var endEmitted = false;
+ r.on('end', function() {
+   endEmitted = true;
+-  console.error('end');
++  //console.error('end');
+ });
+ 
+ var pushes = 0;
+@@ -64,11 +64,11 @@ function push() {
+     return;
+ 
+   if (pushes++ === PUSHCOUNT) {
+-    console.error('   push(EOF)');
++    //console.error('   push(EOF)');
+     return r.push(null);
+   }
+ 
+-  console.error('   push #%d', pushes);
++  //console.error('   push #%d', pushes);
+   if (r.push(new Buffer(PUSHSIZE)))
+     setTimeout(push);
+ }
+diff --git a/test/simple/test-stream2-objects.js b/test/simple/test-stream2-objects.js
+index 3e6931d..ff47d89 100644
+--- a/test/simple/test-stream2-objects.js
++++ b/test/simple/test-stream2-objects.js
+@@ -21,8 +21,8 @@
+ 
+ 
+ var common = require('../common.js');
+-var Readable = require('_stream_readable');
+-var Writable = require('_stream_writable');
++var Readable = require('../../lib/_stream_readable');
++var Writable = require('../../lib/_stream_writable');
+ var assert = require('assert');
+ 
+ // tiny node-tap lookalike.
+diff --git a/test/simple/test-stream2-pipe-error-handling.js b/test/simple/test-stream2-pipe-error-handling.js
+index cf7531c..e3f3e4e 100644
+--- a/test/simple/test-stream2-pipe-error-handling.js
++++ b/test/simple/test-stream2-pipe-error-handling.js
+@@ -21,7 +21,7 @@
+ 
+ var common = require('../common');
+ var assert = require('assert');
+-var stream = require('stream');
++var stream = require('../../');
+ 
+ (function testErrorListenerCatches() {
+   var count = 1000;
+diff --git a/test/simple/test-stream2-pipe-error-once-listener.js b/test/simple/test-stream2-pipe-error-once-listener.js
+index 5e8e3cb..53b2616 100755
+--- a/test/simple/test-stream2-pipe-error-once-listener.js
++++ b/test/simple/test-stream2-pipe-error-once-listener.js
+@@ -24,7 +24,7 @@ var common = require('../common.js');
+ var assert = require('assert');
+ 
+ var util = require('util');
+-var stream = require('stream');
++var stream = require('../../');
+ 
+ 
+ var Read = function() {
+diff --git a/test/simple/test-stream2-push.js b/test/simple/test-stream2-push.js
+index b63edc3..eb2b0e9 100644
+--- a/test/simple/test-stream2-push.js
++++ b/test/simple/test-stream2-push.js
+@@ -20,7 +20,7 @@
+ // USE OR OTHER DEALINGS IN THE SOFTWARE.
+ 
+ var common = require('../common.js');
+-var stream = require('stream');
++var stream = require('../../');
+ var Readable = stream.Readable;
+ var Writable = stream.Writable;
+ var assert = require('assert');
+diff --git a/test/simple/test-stream2-read-sync-stack.js b/test/simple/test-stream2-read-sync-stack.js
+index e8a7305..9740a47 100644
+--- a/test/simple/test-stream2-read-sync-stack.js
++++ b/test/simple/test-stream2-read-sync-stack.js
+@@ -21,7 +21,7 @@
+ 
+ var common = require('../common');
+ var assert = require('assert');
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ var r = new Readable();
+ var N = 256 * 1024;
+ 
+diff --git a/test/simple/test-stream2-readable-empty-buffer-no-eof.js b/test/simple/test-stream2-readable-empty-buffer-no-eof.js
+index cd30178..4b1659d 100644
+--- a/test/simple/test-stream2-readable-empty-buffer-no-eof.js
++++ b/test/simple/test-stream2-readable-empty-buffer-no-eof.js
+@@ -22,10 +22,9 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var Readable = require('stream').Readable;
++var Readable = require('../../').Readable;
+ 
+ test1();
+-test2();
+ 
+ function test1() {
+   var r = new Readable();
+@@ -88,31 +87,3 @@ function test1() {
+     console.log('ok');
+   });
+ }
+-
+-function test2() {
+-  var r = new Readable({ encoding: 'base64' });
+-  var reads = 5;
+-  r._read = function(n) {
+-    if (!reads--)
+-      return r.push(null); // EOF
+-    else
+-      return r.push(new Buffer('x'));
+-  };
+-
+-  var results = [];
+-  function flow() {
+-    var chunk;
+-    while (null !== (chunk = r.read()))
+-      results.push(chunk + '');
+-  }
+-  r.on('readable', flow);
+-  r.on('end', function() {
+-    results.push('EOF');
+-  });
+-  flow();
+-
+-  process.on('exit', function() {
+-    assert.deepEqual(results, [ 'eHh4', 'eHg=', 'EOF' ]);
+-    console.log('ok');
+-  });
+-}
+diff --git a/test/simple/test-stream2-readable-from-list.js b/test/simple/test-stream2-readable-from-list.js
+index 7c96ffe..04a96f5 100644
+--- a/test/simple/test-stream2-readable-from-list.js
++++ b/test/simple/test-stream2-readable-from-list.js
+@@ -21,7 +21,7 @@
+ 
+ var assert = require('assert');
+ var common = require('../common.js');
+-var fromList = require('_stream_readable')._fromList;
++var fromList = require('../../lib/_stream_readable')._fromList;
+ 
+ // tiny node-tap lookalike.
+ var tests = [];
+diff --git a/test/simple/test-stream2-readable-legacy-drain.js b/test/simple/test-stream2-readable-legacy-drain.js
+index 675da8e..51fd3d5 100644
+--- a/test/simple/test-stream2-readable-legacy-drain.js
++++ b/test/simple/test-stream2-readable-legacy-drain.js
+@@ -22,7 +22,7 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var Stream = require('stream');
++var Stream = require('../../');
+ var Readable = Stream.Readable;
+ 
+ var r = new Readable();
+diff --git a/test/simple/test-stream2-readable-non-empty-end.js b/test/simple/test-stream2-readable-non-empty-end.js
+index 7314ae7..c971898 100644
+--- a/test/simple/test-stream2-readable-non-empty-end.js
++++ b/test/simple/test-stream2-readable-non-empty-end.js
+@@ -21,7 +21,7 @@
+ 
+ var assert = require('assert');
+ var common = require('../common.js');
+-var Readable = require('_stream_readable');
++var Readable = require('../../lib/_stream_readable');
+ 
+ var len = 0;
+ var chunks = new Array(10);
+diff --git a/test/simple/test-stream2-readable-wrap-empty.js b/test/simple/test-stream2-readable-wrap-empty.js
+index 2e5cf25..fd8a3dc 100644
+--- a/test/simple/test-stream2-readable-wrap-empty.js
++++ b/test/simple/test-stream2-readable-wrap-empty.js
+@@ -22,7 +22,7 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var Readable = require('_stream_readable');
++var Readable = require('../../lib/_stream_readable');
+ var EE = require('events').EventEmitter;
+ 
+ var oldStream = new EE();
+diff --git a/test/simple/test-stream2-readable-wrap.js b/test/simple/test-stream2-readable-wrap.js
+index 90eea01..6b177f7 100644
+--- a/test/simple/test-stream2-readable-wrap.js
++++ b/test/simple/test-stream2-readable-wrap.js
+@@ -22,8 +22,8 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var Readable = require('_stream_readable');
+-var Writable = require('_stream_writable');
++var Readable = require('../../lib/_stream_readable');
++var Writable = require('../../lib/_stream_writable');
+ var EE = require('events').EventEmitter;
+ 
+ var testRuns = 0, completedRuns = 0;
+diff --git a/test/simple/test-stream2-set-encoding.js b/test/simple/test-stream2-set-encoding.js
+index 5d2c32a..685531b 100644
+--- a/test/simple/test-stream2-set-encoding.js
++++ b/test/simple/test-stream2-set-encoding.js
+@@ -22,7 +22,7 @@
+ 
+ var common = require('../common.js');
+ var assert = require('assert');
+-var R = require('_stream_readable');
++var R = require('../../lib/_stream_readable');
+ var util = require('util');
+ 
+ // tiny node-tap lookalike.
+diff --git a/test/simple/test-stream2-transform.js b/test/simple/test-stream2-transform.js
+index 9c9ddd8..a0cacc6 100644
+--- a/test/simple/test-stream2-transform.js
++++ b/test/simple/test-stream2-transform.js
+@@ -21,8 +21,8 @@
+ 
+ var assert = require('assert');
+ var common = require('../common.js');
+-var PassThrough = require('_stream_passthrough');
+-var Transform = require('_stream_transform');
++var PassThrough = require('../../').PassThrough;
++var Transform = require('../../').Transform;
+ 
+ // tiny node-tap lookalike.
+ var tests = [];
+diff --git a/test/simple/test-stream2-unpipe-drain.js b/test/simple/test-stream2-unpipe-drain.js
+index d66dc3c..365b327 100644
+--- a/test/simple/test-stream2-unpipe-drain.js
++++ b/test/simple/test-stream2-unpipe-drain.js
+@@ -22,7 +22,7 @@
+ 
+ var common = require('../common.js');
+ var assert = require('assert');
+-var stream = require('stream');
++var stream = require('../../');
+ var crypto = require('crypto');
+ 
+ var util = require('util');
+diff --git a/test/simple/test-stream2-unpipe-leak.js b/test/simple/test-stream2-unpipe-leak.js
+index 99f8746..17c92ae 100644
+--- a/test/simple/test-stream2-unpipe-leak.js
++++ b/test/simple/test-stream2-unpipe-leak.js
+@@ -22,7 +22,7 @@
+ 
+ var common = require('../common.js');
+ var assert = require('assert');
+-var stream = require('stream');
++var stream = require('../../');
+ 
+ var chunk = new Buffer('hallo');
+ 
+diff --git a/test/simple/test-stream2-writable.js b/test/simple/test-stream2-writable.js
+index 704100c..209c3a6 100644
+--- a/test/simple/test-stream2-writable.js
++++ b/test/simple/test-stream2-writable.js
+@@ -20,8 +20,8 @@
+ // USE OR OTHER DEALINGS IN THE SOFTWARE.
+ 
+ var common = require('../common.js');
+-var W = require('_stream_writable');
+-var D = require('_stream_duplex');
++var W = require('../../').Writable;
++var D = require('../../').Duplex;
+ var assert = require('assert');
+ 
+ var util = require('util');
+diff --git a/test/simple/test-stream3-pause-then-read.js b/test/simple/test-stream3-pause-then-read.js
+index b91bde3..2f72c15 100644
+--- a/test/simple/test-stream3-pause-then-read.js
++++ b/test/simple/test-stream3-pause-then-read.js
+@@ -22,7 +22,7 @@
+ var common = require('../common');
+ var assert = require('assert');
+ 
+-var stream = require('stream');
++var stream = require('../../');
+ var Readable = stream.Readable;
+ var Writable = stream.Writable;
+ 

resources/app/node_modules/decompress-zip/node_modules/readable-stream/lib/_stream_duplex.js

@@ -0,0 +1,89 @@
+// Copyright Joyent, Inc. and other Node contributors.
+//
+// Permission is hereby granted, free of charge, to any person obtaining a
+// copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to permit
+// persons to whom the Software is furnished to do so, subject to the
+// following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+// USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+// a duplex stream is just a stream that is both readable and writable.
+// Since JS doesn't have multiple prototypal inheritance, this class
+// prototypally inherits from Readable, and then parasitically from
+// Writable.
+
+module.exports = Duplex;
+
+/*<replacement>*/
+var objectKeys = Object.keys || function (obj) {
+  var keys = [];
+  for (var key in obj) keys.push(key);
+  return keys;
+}
+/*</replacement>*/
+
+
+/*<replacement>*/
+var util = require('core-util-is');
+util.inherits = require('inherits');
+/*</replacement>*/
+
+var Readable = require('./_stream_readable');
+var Writable = require('./_stream_writable');
+
+util.inherits(Duplex, Readable);
+
+forEach(objectKeys(Writable.prototype), function(method) {
+  if (!Duplex.prototype[method])
+    Duplex.prototype[method] = Writable.prototype[method];
+});
+
+function Duplex(options) {
+  if (!(this instanceof Duplex))
+    return new Duplex(options);
+
+  Readable.call(this, options);
+  Writable.call(this, options);
+
+  if (options && options.readable === false)
+    this.readable = false;
+
+  if (options && options.writable === false)
+    this.writable = false;
+
+  this.allowHalfOpen = true;
+  if (options && options.allowHalfOpen === false)
+    this.allowHalfOpen = false;
+
+  this.once('end', onend);
+}
+
+// the no-half-open enforcer
+function onend() {
+  // if we allow half-open state, or if the writable side ended,
+  // then we're ok.
+  if (this.allowHalfOpen || this._writableState.ended)
+    return;
+
+  // no more data can be written.
+  // But allow more writes to happen in this tick.
+  process.nextTick(this.end.bind(this));
+}
+
+function forEach (xs, f) {
+  for (var i = 0, l = xs.length; i < l; i++) {
+    f(xs[i], i);
+  }
+}

resources/app/node_modules/decompress-zip/node_modules/readable-stream/lib/_stream_passthrough.js

@@ -0,0 +1,46 @@
+// Copyright Joyent, Inc. and other Node contributors.
+//
+// Permission is hereby granted, free of charge, to any person obtaining a
+// copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to permit
+// persons to whom the Software is furnished to do so, subject to the
+// following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+// USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+// a passthrough stream.
+// basically just the most minimal sort of Transform stream.
+// Every written chunk gets output as-is.
+
+module.exports = PassThrough;
+
+var Transform = require('./_stream_transform');
+
+/*<replacement>*/
+var util = require('core-util-is');
+util.inherits = require('inherits');
+/*</replacement>*/
+
+util.inherits(PassThrough, Transform);
+
+function PassThrough(options) {
+  if (!(this instanceof PassThrough))
+    return new PassThrough(options);
+
+  Transform.call(this, options);
+}
+
+PassThrough.prototype._transform = function(chunk, encoding, cb) {
+  cb(null, chunk);
+};

resources/app/node_modules/decompress-zip/node_modules/readable-stream/lib/_stream_readable.js

@@ -0,0 +1,951 @@
+// Copyright Joyent, Inc. and other Node contributors.
+//
+// Permission is hereby granted, free of charge, to any person obtaining a
+// copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to permit
+// persons to whom the Software is furnished to do so, subject to the
+// following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+// USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+module.exports = Readable;
+
+/*<replacement>*/
+var isArray = require('isarray');
+/*</replacement>*/
+
+
+/*<replacement>*/
+var Buffer = require('buffer').Buffer;
+/*</replacement>*/
+
+Readable.ReadableState = ReadableState;
+
+var EE = require('events').EventEmitter;
+
+/*<replacement>*/
+if (!EE.listenerCount) EE.listenerCount = function(emitter, type) {
+  return emitter.listeners(type).length;
+};
+/*</replacement>*/
+
+var Stream = require('stream');
+
+/*<replacement>*/
+var util = require('core-util-is');
+util.inherits = require('inherits');
+/*</replacement>*/
+
+var StringDecoder;
+
+
+/*<replacement>*/
+var debug = require('util');
+if (debug && debug.debuglog) {
+  debug = debug.debuglog('stream');
+} else {
+  debug = function () {};
+}
+/*</replacement>*/
+
+
+util.inherits(Readable, Stream);
+
+function ReadableState(options, stream) {
+  var Duplex = require('./_stream_duplex');
+
+  options = options || {};
+
+  // the point at which it stops calling _read() to fill the buffer
+  // Note: 0 is a valid value, means "don't call _read preemptively ever"
+  var hwm = options.highWaterMark;
+  var defaultHwm = options.objectMode ? 16 : 16 * 1024;
+  this.highWaterMark = (hwm || hwm === 0) ? hwm : defaultHwm;
+
+  // cast to ints.
+  this.highWaterMark = ~~this.highWaterMark;
+
+  this.buffer = [];
+  this.length = 0;
+  this.pipes = null;
+  this.pipesCount = 0;
+  this.flowing = null;
+  this.ended = false;
+  this.endEmitted = false;
+  this.reading = false;
+
+  // a flag to be able to tell if the onwrite cb is called immediately,
+  // or on a later tick.  We set this to true at first, because any
+  // actions that shouldn't happen until "later" should generally also
+  // not happen before the first write call.
+  this.sync = true;
+
+  // whenever we return null, then we set a flag to say
+  // that we're awaiting a 'readable' event emission.
+  this.needReadable = false;
+  this.emittedReadable = false;
+  this.readableListening = false;
+
+
+  // object stream flag. Used to make read(n) ignore n and to
+  // make all the buffer merging and length checks go away
+  this.objectMode = !!options.objectMode;
+
+  if (stream instanceof Duplex)
+    this.objectMode = this.objectMode || !!options.readableObjectMode;
+
+  // Crypto is kind of old and crusty.  Historically, its default string
+  // encoding is 'binary' so we have to make this configurable.
+  // Everything else in the universe uses 'utf8', though.
+  this.defaultEncoding = options.defaultEncoding || 'utf8';
+
+  // when piping, we only care about 'readable' events that happen
+  // after read()ing all the bytes and not getting any pushback.
+  this.ranOut = false;
+
+  // the number of writers that are awaiting a drain event in .pipe()s
+  this.awaitDrain = 0;
+
+  // if true, a maybeReadMore has been scheduled
+  this.readingMore = false;
+
+  this.decoder = null;
+  this.encoding = null;
+  if (options.encoding) {
+    if (!StringDecoder)
+      StringDecoder = require('string_decoder/').StringDecoder;
+    this.decoder = new StringDecoder(options.encoding);
+    this.encoding = options.encoding;
+  }
+}
+
+function Readable(options) {
+  var Duplex = require('./_stream_duplex');
+
+  if (!(this instanceof Readable))
+    return new Readable(options);
+
+  this._readableState = new ReadableState(options, this);
+
+  // legacy
+  this.readable = true;
+
+  Stream.call(this);
+}
+
+// Manually shove something into the read() buffer.
+// This returns true if the highWaterMark has not been hit yet,
+// similar to how Writable.write() returns true if you should
+// write() some more.
+Readable.prototype.push = function(chunk, encoding) {
+  var state = this._readableState;
+
+  if (util.isString(chunk) && !state.objectMode) {
+    encoding = encoding || state.defaultEncoding;
+    if (encoding !== state.encoding) {
+      chunk = new Buffer(chunk, encoding);
+      encoding = '';
+    }
+  }
+
+  return readableAddChunk(this, state, chunk, encoding, false);
+};
+
+// Unshift should *always* be something directly out of read()
+Readable.prototype.unshift = function(chunk) {
+  var state = this._readableState;
+  return readableAddChunk(this, state, chunk, '', true);
+};
+
+function readableAddChunk(stream, state, chunk, encoding, addToFront) {
+  var er = chunkInvalid(state, chunk);
+  if (er) {
+    stream.emit('error', er);
+  } else if (util.isNullOrUndefined(chunk)) {
+    state.reading = false;
+    if (!state.ended)
+      onEofChunk(stream, state);
+  } else if (state.objectMode || chunk && chunk.length > 0) {
+    if (state.ended && !addToFront) {
+      var e = new Error('stream.push() after EOF');
+      stream.emit('error', e);
+    } else if (state.endEmitted && addToFront) {
+      var e = new Error('stream.unshift() after end event');
+      stream.emit('error', e);
+    } else {
+      if (state.decoder && !addToFront && !encoding)
+        chunk = state.decoder.write(chunk);
+
+      if (!addToFront)
+        state.reading = false;
+
+      // if we want the data now, just emit it.
+      if (state.flowing && state.length === 0 && !state.sync) {
+        stream.emit('data', chunk);
+        stream.read(0);
+      } else {
+        // update the buffer info.
+        state.length += state.objectMode ? 1 : chunk.length;
+        if (addToFront)
+          state.buffer.unshift(chunk);
+        else
+          state.buffer.push(chunk);
+
+        if (state.needReadable)
+          emitReadable(stream);
+      }
+
+      maybeReadMore(stream, state);
+    }
+  } else if (!addToFront) {
+    state.reading = false;
+  }
+
+  return needMoreData(state);
+}
+
+
+
+// if it's past the high water mark, we can push in some more.
+// Also, if we have no data yet, we can stand some
+// more bytes.  This is to work around cases where hwm=0,
+// such as the repl.  Also, if the push() triggered a
+// readable event, and the user called read(largeNumber) such that
+// needReadable was set, then we ought to push more, so that another
+// 'readable' event will be triggered.
+function needMoreData(state) {
+  return !state.ended &&
+         (state.needReadable ||
+          state.length < state.highWaterMark ||
+          state.length === 0);
+}
+
+// backwards compatibility.
+Readable.prototype.setEncoding = function(enc) {
+  if (!StringDecoder)
+    StringDecoder = require('string_decoder/').StringDecoder;
+  this._readableState.decoder = new StringDecoder(enc);
+  this._readableState.encoding = enc;
+  return this;
+};
+
+// Don't raise the hwm > 128MB
+var MAX_HWM = 0x800000;
+function roundUpToNextPowerOf2(n) {
+  if (n >= MAX_HWM) {
+    n = MAX_HWM;
+  } else {
+    // Get the next highest power of 2
+    n--;
+    for (var p = 1; p < 32; p <<= 1) n |= n >> p;
+    n++;
+  }
+  return n;
+}
+
+function howMuchToRead(n, state) {
+  if (state.length === 0 && state.ended)
+    return 0;
+
+  if (state.objectMode)
+    return n === 0 ? 0 : 1;
+
+  if (isNaN(n) || util.isNull(n)) {
+    // only flow one buffer at a time
+    if (state.flowing && state.buffer.length)
+      return state.buffer[0].length;
+    else
+      return state.length;
+  }
+
+  if (n <= 0)
+    return 0;
+
+  // If we're asking for more than the target buffer level,
+  // then raise the water mark.  Bump up to the next highest
+  // power of 2, to prevent increasing it excessively in tiny
+  // amounts.
+  if (n > state.highWaterMark)
+    state.highWaterMark = roundUpToNextPowerOf2(n);
+
+  // don't have that much.  return null, unless we've ended.
+  if (n > state.length) {
+    if (!state.ended) {
+      state.needReadable = true;
+      return 0;
+    } else
+      return state.length;
+  }
+
+  return n;
+}
+
+// you can override either this method, or the async _read(n) below.
+Readable.prototype.read = function(n) {
+  debug('read', n);
+  var state = this._readableState;
+  var nOrig = n;
+
+  if (!util.isNumber(n) || n > 0)
+    state.emittedReadable = false;
+
+  // if we're doing read(0) to trigger a readable event, but we
+  // already have a bunch of data in the buffer, then just trigger
+  // the 'readable' event and move on.
+  if (n === 0 &&
+      state.needReadable &&
+      (state.length >= state.highWaterMark || state.ended)) {
+    debug('read: emitReadable', state.length, state.ended);
+    if (state.length === 0 && state.ended)
+      endReadable(this);
+    else
+      emitReadable(this);
+    return null;
+  }
+
+  n = howMuchToRead(n, state);
+
+  // if we've ended, and we're now clear, then finish it up.
+  if (n === 0 && state.ended) {
+    if (state.length === 0)
+      endReadable(this);
+    return null;
+  }
+
+  // All the actual chunk generation logic needs to be
+  // *below* the call to _read.  The reason is that in certain
+  // synthetic stream cases, such as passthrough streams, _read
+  // may be a completely synchronous operation which may change
+  // the state of the read buffer, providing enough data when
+  // before there was *not* enough.
+  //
+  // So, the steps are:
+  // 1. Figure out what the state of things will be after we do
+  // a read from the buffer.
+  //
+  // 2. If that resulting state will trigger a _read, then call _read.
+  // Note that this may be asynchronous, or synchronous.  Yes, it is
+  // deeply ugly to write APIs this way, but that still doesn't mean
+  // that the Readable class should behave improperly, as streams are
+  // designed to be sync/async agnostic.
+  // Take note if the _read call is sync or async (ie, if the read call
+  // has returned yet), so that we know whether or not it's safe to emit
+  // 'readable' etc.
+  //
+  // 3. Actually pull the requested chunks out of the buffer and return.
+
+  // if we need a readable event, then we need to do some reading.
+  var doRead = state.needReadable;
+  debug('need readable', doRead);
+
+  // if we currently have less than the highWaterMark, then also read some
+  if (state.length === 0 || state.length - n < state.highWaterMark) {
+    doRead = true;
+    debug('length less than watermark', doRead);
+  }
+
+  // however, if we've ended, then there's no point, and if we're already
+  // reading, then it's unnecessary.
+  if (state.ended || state.reading) {
+    doRead = false;
+    debug('reading or ended', doRead);
+  }
+
+  if (doRead) {
+    debug('do read');
+    state.reading = true;
+    state.sync = true;
+    // if the length is currently zero, then we *need* a readable event.
+    if (state.length === 0)
+      state.needReadable = true;
+    // call internal read method
+    this._read(state.highWaterMark);
+    state.sync = false;
+  }
+
+  // If _read pushed data synchronously, then `reading` will be false,
+  // and we need to re-evaluate how much data we can return to the user.
+  if (doRead && !state.reading)
+    n = howMuchToRead(nOrig, state);
+
+  var ret;
+  if (n > 0)
+    ret = fromList(n, state);
+  else
+    ret = null;
+
+  if (util.isNull(ret)) {
+    state.needReadable = true;
+    n = 0;
+  }
+
+  state.length -= n;
+
+  // If we have nothing in the buffer, then we want to know
+  // as soon as we *do* get something into the buffer.
+  if (state.length === 0 && !state.ended)
+    state.needReadable = true;
+
+  // If we tried to read() past the EOF, then emit end on the next tick.
+  if (nOrig !== n && state.ended && state.length === 0)
+    endReadable(this);
+
+  if (!util.isNull(ret))
+    this.emit('data', ret);
+
+  return ret;
+};
+
+function chunkInvalid(state, chunk) {
+  var er = null;
+  if (!util.isBuffer(chunk) &&
+      !util.isString(chunk) &&
+      !util.isNullOrUndefined(chunk) &&
+      !state.objectMode) {
+    er = new TypeError('Invalid non-string/buffer chunk');
+  }
+  return er;
+}
+
+
+function onEofChunk(stream, state) {
+  if (state.decoder && !state.ended) {
+    var chunk = state.decoder.end();
+    if (chunk && chunk.length) {
+      state.buffer.push(chunk);
+      state.length += state.objectMode ? 1 : chunk.length;
+    }
+  }
+  state.ended = true;
+
+  // emit 'readable' now to make sure it gets picked up.
+  emitReadable(stream);
+}
+
+// Don't emit readable right away in sync mode, because this can trigger
+// another read() call => stack overflow.  This way, it might trigger
+// a nextTick recursion warning, but that's not so bad.
+function emitReadable(stream) {
+  var state = stream._readableState;
+  state.needReadable = false;
+  if (!state.emittedReadable) {
+    debug('emitReadable', state.flowing);
+    state.emittedReadable = true;
+    if (state.sync)
+      process.nextTick(function() {
+        emitReadable_(stream);
+      });
+    else
+      emitReadable_(stream);
+  }
+}
+
+function emitReadable_(stream) {
+  debug('emit readable');
+  stream.emit('readable');
+  flow(stream);
+}
+
+
+// at this point, the user has presumably seen the 'readable' event,
+// and called read() to consume some data.  that may have triggered
+// in turn another _read(n) call, in which case reading = true if
+// it's in progress.
+// However, if we're not ended, or reading, and the length < hwm,
+// then go ahead and try to read some more preemptively.
+function maybeReadMore(stream, state) {
+  if (!state.readingMore) {
+    state.readingMore = true;
+    process.nextTick(function() {
+      maybeReadMore_(stream, state);
+    });
+  }
+}
+
+function maybeReadMore_(stream, state) {
+  var len = state.length;
+  while (!state.reading && !state.flowing && !state.ended &&
+         state.length < state.highWaterMark) {
+    debug('maybeReadMore read 0');
+    stream.read(0);
+    if (len === state.length)
+      // didn't get any data, stop spinning.
+      break;
+    else
+      len = state.length;
+  }
+  state.readingMore = false;
+}
+
+// abstract method.  to be overridden in specific implementation classes.
+// call cb(er, data) where data is <= n in length.
+// for virtual (non-string, non-buffer) streams, "length" is somewhat
+// arbitrary, and perhaps not very meaningful.
+Readable.prototype._read = function(n) {
+  this.emit('error', new Error('not implemented'));
+};
+
+Readable.prototype.pipe = function(dest, pipeOpts) {
+  var src = this;
+  var state = this._readableState;
+
+  switch (state.pipesCount) {
+    case 0:
+      state.pipes = dest;
+      break;
+    case 1:
+      state.pipes = [state.pipes, dest];
+      break;
+    default:
+      state.pipes.push(dest);
+      break;
+  }
+  state.pipesCount += 1;
+  debug('pipe count=%d opts=%j', state.pipesCount, pipeOpts);
+
+  var doEnd = (!pipeOpts || pipeOpts.end !== false) &&
+              dest !== process.stdout &&
+              dest !== process.stderr;
+
+  var endFn = doEnd ? onend : cleanup;
+  if (state.endEmitted)
+    process.nextTick(endFn);
+  else
+    src.once('end', endFn);
+
+  dest.on('unpipe', onunpipe);
+  function onunpipe(readable) {
+    debug('onunpipe');
+    if (readable === src) {
+      cleanup();
+    }
+  }
+
+  function onend() {
+    debug('onend');
+    dest.end();
+  }
+
+  // when the dest drains, it reduces the awaitDrain counter
+  // on the source.  This would be more elegant with a .once()
+  // handler in flow(), but adding and removing repeatedly is
+  // too slow.
+  var ondrain = pipeOnDrain(src);
+  dest.on('drain', ondrain);
+
+  function cleanup() {
+    debug('cleanup');
+    // cleanup event handlers once the pipe is broken
+    dest.removeListener('close', onclose);
+    dest.removeListener('finish', onfinish);
+    dest.removeListener('drain', ondrain);
+    dest.removeListener('error', onerror);
+    dest.removeListener('unpipe', onunpipe);
+    src.removeListener('end', onend);
+    src.removeListener('end', cleanup);
+    src.removeListener('data', ondata);
+
+    // if the reader is waiting for a drain event from this
+    // specific writer, then it would cause it to never start
+    // flowing again.
+    // So, if this is awaiting a drain, then we just call it now.
+    // If we don't know, then assume that we are waiting for one.
+    if (state.awaitDrain &&
+        (!dest._writableState || dest._writableState.needDrain))
+      ondrain();
+  }
+
+  src.on('data', ondata);
+  function ondata(chunk) {
+    debug('ondata');
+    var ret = dest.write(chunk);
+    if (false === ret) {
+      debug('false write response, pause',
+            src._readableState.awaitDrain);
+      src._readableState.awaitDrain++;
+      src.pause();
+    }
+  }
+
+  // if the dest has an error, then stop piping into it.
+  // however, don't suppress the throwing behavior for this.
+  function onerror(er) {
+    debug('onerror', er);
+    unpipe();
+    dest.removeListener('error', onerror);
+    if (EE.listenerCount(dest, 'error') === 0)
+      dest.emit('error', er);
+  }
+  // This is a brutally ugly hack to make sure that our error handler
+  // is attached before any userland ones.  NEVER DO THIS.
+  if (!dest._events || !dest._events.error)
+    dest.on('error', onerror);
+  else if (isArray(dest._events.error))
+    dest._events.error.unshift(onerror);
+  else
+    dest._events.error = [onerror, dest._events.error];
+
+
+
+  // Both close and finish should trigger unpipe, but only once.
+  function onclose() {
+    dest.removeListener('finish', onfinish);
+    unpipe();
+  }
+  dest.once('close', onclose);
+  function onfinish() {
+    debug('onfinish');
+    dest.removeListener('close', onclose);
+    unpipe();
+  }
+  dest.once('finish', onfinish);
+
+  function unpipe() {
+    debug('unpipe');
+    src.unpipe(dest);
+  }
+
+  // tell the dest that it's being piped to
+  dest.emit('pipe', src);
+
+  // start the flow if it hasn't been started already.
+  if (!state.flowing) {
+    debug('pipe resume');
+    src.resume();
+  }
+
+  return dest;
+};
+
+function pipeOnDrain(src) {
+  return function() {
+    var state = src._readableState;
+    debug('pipeOnDrain', state.awaitDrain);
+    if (state.awaitDrain)
+      state.awaitDrain--;
+    if (state.awaitDrain === 0 && EE.listenerCount(src, 'data')) {
+      state.flowing = true;
+      flow(src);
+    }
+  };
+}
+
+
+Readable.prototype.unpipe = function(dest) {
+  var state = this._readableState;
+
+  // if we're not piping anywhere, then do nothing.
+  if (state.pipesCount === 0)
+    return this;
+
+  // just one destination.  most common case.
+  if (state.pipesCount === 1) {
+    // passed in one, but it's not the right one.
+    if (dest && dest !== state.pipes)
+      return this;
+
+    if (!dest)
+      dest = state.pipes;
+
+    // got a match.
+    state.pipes = null;
+    state.pipesCount = 0;
+    state.flowing = false;
+    if (dest)
+      dest.emit('unpipe', this);
+    return this;
+  }
+
+  // slow case. multiple pipe destinations.
+
+  if (!dest) {
+    // remove all.
+    var dests = state.pipes;
+    var len = state.pipesCount;
+    state.pipes = null;
+    state.pipesCount = 0;
+    state.flowing = false;
+
+    for (var i = 0; i < len; i++)
+      dests[i].emit('unpipe', this);
+    return this;
+  }
+
+  // try to find the right one.
+  var i = indexOf(state.pipes, dest);
+  if (i === -1)
+    return this;
+
+  state.pipes.splice(i, 1);
+  state.pipesCount -= 1;
+  if (state.pipesCount === 1)
+    state.pipes = state.pipes[0];
+
+  dest.emit('unpipe', this);
+
+  return this;
+};
+
+// set up data events if they are asked for
+// Ensure readable listeners eventually get something
+Readable.prototype.on = function(ev, fn) {
+  var res = Stream.prototype.on.call(this, ev, fn);
+
+  // If listening to data, and it has not explicitly been paused,
+  // then call resume to start the flow of data on the next tick.
+  if (ev === 'data' && false !== this._readableState.flowing) {
+    this.resume();
+  }
+
+  if (ev === 'readable' && this.readable) {
+    var state = this._readableState;
+    if (!state.readableListening) {
+      state.readableListening = true;
+      state.emittedReadable = false;
+      state.needReadable = true;
+      if (!state.reading) {
+        var self = this;
+        process.nextTick(function() {
+          debug('readable nexttick read 0');
+          self.read(0);
+        });
+      } else if (state.length) {
+        emitReadable(this, state);
+      }
+    }
+  }
+
+  return res;
+};
+Readable.prototype.addListener = Readable.prototype.on;
+
+// pause() and resume() are remnants of the legacy readable stream API
+// If the user uses them, then switch into old mode.
+Readable.prototype.resume = function() {
+  var state = this._readableState;
+  if (!state.flowing) {
+    debug('resume');
+    state.flowing = true;
+    if (!state.reading) {
+      debug('resume read 0');
+      this.read(0);
+    }
+    resume(this, state);
+  }
+  return this;
+};
+
+function resume(stream, state) {
+  if (!state.resumeScheduled) {
+    state.resumeScheduled = true;
+    process.nextTick(function() {
+      resume_(stream, state);
+    });
+  }
+}
+
+function resume_(stream, state) {
+  state.resumeScheduled = false;
+  stream.emit('resume');
+  flow(stream);
+  if (state.flowing && !state.reading)
+    stream.read(0);
+}
+
+Readable.prototype.pause = function() {
+  debug('call pause flowing=%j', this._readableState.flowing);
+  if (false !== this._readableState.flowing) {
+    debug('pause');
+    this._readableState.flowing = false;
+    this.emit('pause');
+  }
+  return this;
+};
+
+function flow(stream) {
+  var state = stream._readableState;
+  debug('flow', state.flowing);
+  if (state.flowing) {
+    do {
+      var chunk = stream.read();
+    } while (null !== chunk && state.flowing);
+  }
+}
+
+// wrap an old-style stream as the async data source.
+// This is *not* part of the readable stream interface.
+// It is an ugly unfortunate mess of history.
+Readable.prototype.wrap = function(stream) {
+  var state = this._readableState;
+  var paused = false;
+
+  var self = this;
+  stream.on('end', function() {
+    debug('wrapped end');
+    if (state.decoder && !state.ended) {
+      var chunk = state.decoder.end();
+      if (chunk && chunk.length)
+        self.push(chunk);
+    }
+
+    self.push(null);
+  });
+
+  stream.on('data', function(chunk) {
+    debug('wrapped data');
+    if (state.decoder)
+      chunk = state.decoder.write(chunk);
+    if (!chunk || !state.objectMode && !chunk.length)
+      return;
+
+    var ret = self.push(chunk);
+    if (!ret) {
+      paused = true;
+      stream.pause();
+    }
+  });
+
+  // proxy all the other methods.
+  // important when wrapping filters and duplexes.
+  for (var i in stream) {
+    if (util.isFunction(stream[i]) && util.isUndefined(this[i])) {
+      this[i] = function(method) { return function() {
+        return stream[method].apply(stream, arguments);
+      }}(i);
+    }
+  }
+
+  // proxy certain important events.
+  var events = ['error', 'close', 'destroy', 'pause', 'resume'];
+  forEach(events, function(ev) {
+    stream.on(ev, self.emit.bind(self, ev));
+  });
+
+  // when we try to consume some more bytes, simply unpause the
+  // underlying stream.
+  self._read = function(n) {
+    debug('wrapped _read', n);
+    if (paused) {
+      paused = false;
+      stream.resume();
+    }
+  };
+
+  return self;
+};
+
+
+
+// exposed for testing purposes only.
+Readable._fromList = fromList;
+
+// Pluck off n bytes from an array of buffers.
+// Length is the combined lengths of all the buffers in the list.
+function fromList(n, state) {
+  var list = state.buffer;
+  var length = state.length;
+  var stringMode = !!state.decoder;
+  var objectMode = !!state.objectMode;
+  var ret;
+
+  // nothing in the list, definitely empty.
+  if (list.length === 0)
+    return null;
+
+  if (length === 0)
+    ret = null;
+  else if (objectMode)
+    ret = list.shift();
+  else if (!n || n >= length) {
+    // read it all, truncate the array.
+    if (stringMode)
+      ret = list.join('');
+    else
+      ret = Buffer.concat(list, length);
+    list.length = 0;
+  } else {
+    // read just some of it.
+    if (n < list[0].length) {
+      // just take a part of the first list item.
+      // slice is the same for buffers and strings.
+      var buf = list[0];
+      ret = buf.slice(0, n);
+      list[0] = buf.slice(n);
+    } else if (n === list[0].length) {
+      // first list is a perfect match
+      ret = list.shift();
+    } else {
+      // complex case.
+      // we have enough to cover it, but it spans past the first buffer.
+      if (stringMode)
+        ret = '';
+      else
+        ret = new Buffer(n);
+
+      var c = 0;
+      for (var i = 0, l = list.length; i < l && c < n; i++) {
+        var buf = list[0];
+        var cpy = Math.min(n - c, buf.length);
+
+        if (stringMode)
+          ret += buf.slice(0, cpy);
+        else
+          buf.copy(ret, c, 0, cpy);
+
+        if (cpy < buf.length)
+          list[0] = buf.slice(cpy);
+        else
+          list.shift();
+
+        c += cpy;
+      }
+    }
+  }
+
+  return ret;
+}
+
+function endReadable(stream) {
+  var state = stream._readableState;
+
+  // If we get here before consuming all the bytes, then that is a
+  // bug in node.  Should never happen.
+  if (state.length > 0)
+    throw new Error('endReadable called on non-empty stream');
+
+  if (!state.endEmitted) {
+    state.ended = true;
+    process.nextTick(function() {
+      // Check that we didn't get one last unshift.
+      if (!state.endEmitted && state.length === 0) {
+        state.endEmitted = true;
+        stream.readable = false;
+        stream.emit('end');
+      }
+    });
+  }
+}
+
+function forEach (xs, f) {
+  for (var i = 0, l = xs.length; i < l; i++) {
+    f(xs[i], i);
+  }
+}
+
+function indexOf (xs, x) {
+  for (var i = 0, l = xs.length; i < l; i++) {
+    if (xs[i] === x) return i;
+  }
+  return -1;
+}

resources/app/node_modules/decompress-zip/node_modules/readable-stream/lib/_stream_transform.js

@@ -0,0 +1,209 @@
+// Copyright Joyent, Inc. and other Node contributors.
+//
+// Permission is hereby granted, free of charge, to any person obtaining a
+// copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to permit
+// persons to whom the Software is furnished to do so, subject to the
+// following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+// USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+
+// a transform stream is a readable/writable stream where you do
+// something with the data.  Sometimes it's called a "filter",
+// but that's not a great name for it, since that implies a thing where
+// some bits pass through, and others are simply ignored.  (That would
+// be a valid example of a transform, of course.)
+//
+// While the output is causally related to the input, it's not a
+// necessarily symmetric or synchronous transformation.  For example,
+// a zlib stream might take multiple plain-text writes(), and then
+// emit a single compressed chunk some time in the future.
+//
+// Here's how this works:
+//
+// The Transform stream has all the aspects of the readable and writable
+// stream classes.  When you write(chunk), that calls _write(chunk,cb)
+// internally, and returns false if there's a lot of pending writes
+// buffered up.  When you call read(), that calls _read(n) until
+// there's enough pending readable data buffered up.
+//
+// In a transform stream, the written data is placed in a buffer.  When
+// _read(n) is called, it transforms the queued up data, calling the
+// buffered _write cb's as it consumes chunks.  If consuming a single
+// written chunk would result in multiple output chunks, then the first
+// outputted bit calls the readcb, and subsequent chunks just go into
+// the read buffer, and will cause it to emit 'readable' if necessary.
+//
+// This way, back-pressure is actually determined by the reading side,
+// since _read has to be called to start processing a new chunk.  However,
+// a pathological inflate type of transform can cause excessive buffering
+// here.  For example, imagine a stream where every byte of input is
+// interpreted as an integer from 0-255, and then results in that many
+// bytes of output.  Writing the 4 bytes {ff,ff,ff,ff} would result in
+// 1kb of data being output.  In this case, you could write a very small
+// amount of input, and end up with a very large amount of output.  In
+// such a pathological inflating mechanism, there'd be no way to tell
+// the system to stop doing the transform.  A single 4MB write could
+// cause the system to run out of memory.
+//
+// However, even in such a pathological case, only a single written chunk
+// would be consumed, and then the rest would wait (un-transformed) until
+// the results of the previous transformed chunk were consumed.
+
+module.exports = Transform;
+
+var Duplex = require('./_stream_duplex');
+
+/*<replacement>*/
+var util = require('core-util-is');
+util.inherits = require('inherits');
+/*</replacement>*/
+
+util.inherits(Transform, Duplex);
+
+
+function TransformState(options, stream) {
+  this.afterTransform = function(er, data) {
+    return afterTransform(stream, er, data);
+  };
+
+  this.needTransform = false;
+  this.transforming = false;
+  this.writecb = null;
+  this.writechunk = null;
+}
+
+function afterTransform(stream, er, data) {
+  var ts = stream._transformState;
+  ts.transforming = false;
+
+  var cb = ts.writecb;
+
+  if (!cb)
+    return stream.emit('error', new Error('no writecb in Transform class'));
+
+  ts.writechunk = null;
+  ts.writecb = null;
+
+  if (!util.isNullOrUndefined(data))
+    stream.push(data);
+
+  if (cb)
+    cb(er);
+
+  var rs = stream._readableState;
+  rs.reading = false;
+  if (rs.needReadable || rs.length < rs.highWaterMark) {
+    stream._read(rs.highWaterMark);
+  }
+}
+
+
+function Transform(options) {
+  if (!(this instanceof Transform))
+    return new Transform(options);
+
+  Duplex.call(this, options);
+
+  this._transformState = new TransformState(options, this);
+
+  // when the writable side finishes, then flush out anything remaining.
+  var stream = this;
+
+  // start out asking for a readable event once data is transformed.
+  this._readableState.needReadable = true;
+
+  // we have implemented the _read method, and done the other things
+  // that Readable wants before the first _read call, so unset the
+  // sync guard flag.
+  this._readableState.sync = false;
+
+  this.once('prefinish', function() {
+    if (util.isFunction(this._flush))
+      this._flush(function(er) {
+        done(stream, er);
+      });
+    else
+      done(stream);
+  });
+}
+
+Transform.prototype.push = function(chunk, encoding) {
+  this._transformState.needTransform = false;
+  return Duplex.prototype.push.call(this, chunk, encoding);
+};
+
+// This is the part where you do stuff!
+// override this function in implementation classes.
+// 'chunk' is an input chunk.
+//
+// Call `push(newChunk)` to pass along transformed output
+// to the readable side.  You may call 'push' zero or more times.
+//
+// Call `cb(err)` when you are done with this chunk.  If you pass
+// an error, then that'll put the hurt on the whole operation.  If you
+// never call cb(), then you'll never get another chunk.
+Transform.prototype._transform = function(chunk, encoding, cb) {
+  throw new Error('not implemented');
+};
+
+Transform.prototype._write = function(chunk, encoding, cb) {
+  var ts = this._transformState;
+  ts.writecb = cb;
+  ts.writechunk = chunk;
+  ts.writeencoding = encoding;
+  if (!ts.transforming) {
+    var rs = this._readableState;
+    if (ts.needTransform ||
+        rs.needReadable ||
+        rs.length < rs.highWaterMark)
+      this._read(rs.highWaterMark);
+  }
+};
+
+// Doesn't matter what the args are here.
+// _transform does all the work.
+// That we got here means that the readable side wants more data.
+Transform.prototype._read = function(n) {
+  var ts = this._transformState;
+
+  if (!util.isNull(ts.writechunk) && ts.writecb && !ts.transforming) {
+    ts.transforming = true;
+    this._transform(ts.writechunk, ts.writeencoding, ts.afterTransform);
+  } else {
+    // mark that we need a transform, so that any data that comes in
+    // will get processed, now that we've asked for it.
+    ts.needTransform = true;
+  }
+};
+
+
+function done(stream, er) {
+  if (er)
+    return stream.emit('error', er);
+
+  // if there's nothing in the write buffer, then that means
+  // that nothing more will ever be provided
+  var ws = stream._writableState;
+  var ts = stream._transformState;
+
+  if (ws.length)
+    throw new Error('calling transform done when ws.length != 0');
+
+  if (ts.transforming)
+    throw new Error('calling transform done when still transforming');
+
+  return stream.push(null);
+}

resources/app/node_modules/decompress-zip/node_modules/readable-stream/lib/_stream_writable.js

@@ -0,0 +1,477 @@
+// Copyright Joyent, Inc. and other Node contributors.
+//
+// Permission is hereby granted, free of charge, to any person obtaining a
+// copy of this software and associated documentation files (the
+// "Software"), to deal in the Software without restriction, including
+// without limitation the rights to use, copy, modify, merge, publish,
+// distribute, sublicense, and/or sell copies of the Software, and to permit
+// persons to whom the Software is furnished to do so, subject to the
+// following conditions:
+//
+// The above copyright notice and this permission notice shall be included
+// in all copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
+// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+// USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+// A bit simpler than readable streams.
+// Implement an async ._write(chunk, cb), and it'll handle all
+// the drain event emission and buffering.
+
+module.exports = Writable;
+
+/*<replacement>*/
+var Buffer = require('buffer').Buffer;
+/*</replacement>*/
+
+Writable.WritableState = WritableState;
+
+
+/*<replacement>*/
+var util = require('core-util-is');
+util.inherits = require('inherits');
+/*</replacement>*/
+
+var Stream = require('stream');
+
+util.inherits(Writable, Stream);
+
+function WriteReq(chunk, encoding, cb) {
+  this.chunk = chunk;
+  this.encoding = encoding;
+  this.callback = cb;
+}
+
+function WritableState(options, stream) {
+  var Duplex = require('./_stream_duplex');
+
+  options = options || {};
+
+  // the point at which write() starts returning false
+  // Note: 0 is a valid value, means that we always return false if
+  // the entire buffer is not flushed immediately on write()
+  var hwm = options.highWaterMark;
+  var defaultHwm = options.objectMode ? 16 : 16 * 1024;
+  this.highWaterMark = (hwm || hwm === 0) ? hwm : defaultHwm;
+
+  // object stream flag to indicate whether or not this stream
+  // contains buffers or objects.
+  this.objectMode = !!options.objectMode;
+
+  if (stream instanceof Duplex)
+    this.objectMode = this.objectMode || !!options.writableObjectMode;
+
+  // cast to ints.
+  this.highWaterMark = ~~this.highWaterMark;
+
+  this.needDrain = false;
+  // at the start of calling end()
+  this.ending = false;
+  // when end() has been called, and returned
+  this.ended = false;
+  // when 'finish' is emitted
+  this.finished = false;
+
+  // should we decode strings into buffers before passing to _write?
+  // this is here so that some node-core streams can optimize string
+  // handling at a lower level.
+  var noDecode = options.decodeStrings === false;
+  this.decodeStrings = !noDecode;
+
+  // Crypto is kind of old and crusty.  Historically, its default string
+  // encoding is 'binary' so we have to make this configurable.
+  // Everything else in the universe uses 'utf8', though.
+  this.defaultEncoding = options.defaultEncoding || 'utf8';
+
+  // not an actual buffer we keep track of, but a measurement
+  // of how much we're waiting to get pushed to some underlying
+  // socket or file.
+  this.length = 0;
+
+  // a flag to see when we're in the middle of a write.
+  this.writing = false;
+
+  // when true all writes will be buffered until .uncork() call
+  this.corked = 0;
+
+  // a flag to be able to tell if the onwrite cb is called immediately,
+  // or on a later tick.  We set this to true at first, because any
+  // actions that shouldn't happen until "later" should generally also
+  // not happen before the first write call.
+  this.sync = true;
+
+  // a flag to know if we're processing previously buffered items, which
+  // may call the _write() callback in the same tick, so that we don't
+  // end up in an overlapped onwrite situation.
+  this.bufferProcessing = false;
+
+  // the callback that's passed to _write(chunk,cb)
+  this.onwrite = function(er) {
+    onwrite(stream, er);
+  };
+
+  // the callback that the user supplies to write(chunk,encoding,cb)
+  this.writecb = null;
+
+  // the amount that is being written when _write is called.
+  this.writelen = 0;
+
+  this.buffer = [];
+
+  // number of pending user-supplied write callbacks
+  // this must be 0 before 'finish' can be emitted
+  this.pendingcb = 0;
+
+  // emit prefinish if the only thing we're waiting for is _write cbs
+  // This is relevant for synchronous Transform streams
+  this.prefinished = false;
+
+  // True if the error was already emitted and should not be thrown again
+  this.errorEmitted = false;
+}
+
+function Writable(options) {
+  var Duplex = require('./_stream_duplex');
+
+  // Writable ctor is applied to Duplexes, though they're not
+  // instanceof Writable, they're instanceof Readable.
+  if (!(this instanceof Writable) && !(this instanceof Duplex))
+    return new Writable(options);
+
+  this._writableState = new WritableState(options, this);
+
+  // legacy.
+  this.writable = true;
+
+  Stream.call(this);
+}
+
+// Otherwise people can pipe Writable streams, which is just wrong.
+Writable.prototype.pipe = function() {
+  this.emit('error', new Error('Cannot pipe. Not readable.'));
+};
+
+
+function writeAfterEnd(stream, state, cb) {
+  var er = new Error('write after end');
+  // TODO: defer error events consistently everywhere, not just the cb
+  stream.emit('error', er);
+  process.nextTick(function() {
+    cb(er);
+  });
+}
+
+// If we get something that is not a buffer, string, null, or undefined,
+// and we're not in objectMode, then that's an error.
+// Otherwise stream chunks are all considered to be of length=1, and the
+// watermarks determine how many objects to keep in the buffer, rather than
+// how many bytes or characters.
+function validChunk(stream, state, chunk, cb) {
+  var valid = true;
+  if (!util.isBuffer(chunk) &&
+      !util.isString(chunk) &&
+      !util.isNullOrUndefined(chunk) &&
+      !state.objectMode) {
+    var er = new TypeError('Invalid non-string/buffer chunk');
+    stream.emit('error', er);
+    process.nextTick(function() {
+      cb(er);
+    });
+    valid = false;
+  }
+  return valid;
+}
+
+Writable.prototype.write = function(chunk, encoding, cb) {
+  var state = this._writableState;
+  var ret = false;
+
+  if (util.isFunction(encoding)) {
+    cb = encoding;
+    encoding = null;
+  }
+
+  if (util.isBuffer(chunk))
+    encoding = 'buffer';
+  else if (!encoding)
+    encoding = state.defaultEncoding;
+
+  if (!util.isFunction(cb))
+    cb = function() {};
+
+  if (state.ended)
+    writeAfterEnd(this, state, cb);
+  else if (validChunk(this, state, chunk, cb)) {
+    state.pendingcb++;
+    ret = writeOrBuffer(this, state, chunk, encoding, cb);
+  }
+
+  return ret;
+};
+
+Writable.prototype.cork = function() {
+  var state = this._writableState;
+
+  state.corked++;
+};
+
+Writable.prototype.uncork = function() {
+  var state = this._writableState;
+
+  if (state.corked) {
+    state.corked--;
+
+    if (!state.writing &&
+        !state.corked &&
+        !state.finished &&
+        !state.bufferProcessing &&
+        state.buffer.length)
+      clearBuffer(this, state);
+  }
+};
+
+function decodeChunk(state, chunk, encoding) {
+  if (!state.objectMode &&
+      state.decodeStrings !== false &&
+      util.isString(chunk)) {
+    chunk = new Buffer(chunk, encoding);
+  }
+  return chunk;
+}
+
+// if we're already writing something, then just put this
+// in the queue, and wait our turn.  Otherwise, call _write
+// If we return false, then we need a drain event, so set that flag.
+function writeOrBuffer(stream, state, chunk, encoding, cb) {
+  chunk = decodeChunk(state, chunk, encoding);
+  if (util.isBuffer(chunk))
+    encoding = 'buffer';
+  var len = state.objectMode ? 1 : chunk.length;
+
+  state.length += len;
+
+  var ret = state.length < state.highWaterMark;
+  // we must ensure that previous needDrain will not be reset to false.
+  if (!ret)
+    state.needDrain = true;
+
+  if (state.writing || state.corked)
+    state.buffer.push(new WriteReq(chunk, encoding, cb));
+  else
+    doWrite(stream, state, false, len, chunk, encoding, cb);
+
+  return ret;
+}
+
+function doWrite(stream, state, writev, len, chunk, encoding, cb) {
+  state.writelen = len;
+  state.writecb = cb;
+  state.writing = true;
+  state.sync = true;
+  if (writev)
+    stream._writev(chunk, state.onwrite);
+  else
+    stream._write(chunk, encoding, state.onwrite);
+  state.sync = false;
+}
+
+function onwriteError(stream, state, sync, er, cb) {
+  if (sync)
+    process.nextTick(function() {
+      state.pendingcb--;
+      cb(er);
+    });
+  else {
+    state.pendingcb--;
+    cb(er);
+  }
+
+  stream._writableState.errorEmitted = true;
+  stream.emit('error', er);
+}
+
+function onwriteStateUpdate(state) {
+  state.writing = false;
+  state.writecb = null;
+  state.length -= state.writelen;
+  state.writelen = 0;
+}
+
+function onwrite(stream, er) {
+  var state = stream._writableState;
+  var sync = state.sync;
+  var cb = state.writecb;
+
+  onwriteStateUpdate(state);
+
+  if (er)
+    onwriteError(stream, state, sync, er, cb);
+  else {
+    // Check if we're actually ready to finish, but don't emit yet
+    var finished = needFinish(stream, state);
+
+    if (!finished &&
+        !state.corked &&
+        !state.bufferProcessing &&
+        state.buffer.length) {
+      clearBuffer(stream, state);
+    }
+
+    if (sync) {
+      process.nextTick(function() {
+        afterWrite(stream, state, finished, cb);
+      });
+    } else {
+      afterWrite(stream, state, finished, cb);
+    }
+  }
+}
+
+function afterWrite(stream, state, finished, cb) {
+  if (!finished)
+    onwriteDrain(stream, state);
+  state.pendingcb--;
+  cb();
+  finishMaybe(stream, state);
+}
+
+// Must force callback to be called on nextTick, so that we don't
+// emit 'drain' before the write() consumer gets the 'false' return
+// value, and has a chance to attach a 'drain' listener.
+function onwriteDrain(stream, state) {
+  if (state.length === 0 && state.needDrain) {
+    state.needDrain = false;
+    stream.emit('drain');
+  }
+}
+
+
+// if there's something in the buffer waiting, then process it
+function clearBuffer(stream, state) {
+  state.bufferProcessing = true;
+
+  if (stream._writev && state.buffer.length > 1) {
+    // Fast case, write everything using _writev()
+    var cbs = [];
+    for (var c = 0; c < state.buffer.length; c++)
+      cbs.push(state.buffer[c].callback);
+
+    // count the one we are adding, as well.
+    // TODO(isaacs) clean this up
+    state.pendingcb++;
+    doWrite(stream, state, true, state.length, state.buffer, '', function(err) {
+      for (var i = 0; i < cbs.length; i++) {
+        state.pendingcb--;
+        cbs[i](err);
+      }
+    });
+
+    // Clear buffer
+    state.buffer = [];
+  } else {
+    // Slow case, write chunks one-by-one
+    for (var c = 0; c < state.buffer.length; c++) {
+      var entry = state.buffer[c];
+      var chunk = entry.chunk;
+      var encoding = entry.encoding;
+      var cb = entry.callback;
+      var len = state.objectMode ? 1 : chunk.length;
+
+      doWrite(stream, state, false, len, chunk, encoding, cb);
+
+      // if we didn't call the onwrite immediately, then
+      // it means that we need to wait until it does.
+      // also, that means that the chunk and cb are currently
+      // being processed, so move the buffer counter past them.
+      if (state.writing) {
+        c++;
+        break;
+      }
+    }
+
+    if (c < state.buffer.length)
+      state.buffer = state.buffer.slice(c);
+    else
+      state.buffer.length = 0;
+  }
+
+  state.bufferProcessing = false;
+}
+
+Writable.prototype._write = function(chunk, encoding, cb) {
+  cb(new Error('not implemented'));
+
+};
+
+Writable.prototype._writev = null;
+
+Writable.prototype.end = function(chunk, encoding, cb) {
+  var state = this._writableState;
+
+  if (util.isFunction(chunk)) {
+    cb = chunk;
+    chunk = null;
+    encoding = null;
+  } else if (util.isFunction(encoding)) {
+    cb = encoding;
+    encoding = null;
+  }
+
+  if (!util.isNullOrUndefined(chunk))
+    this.write(chunk, encoding);
+
+  // .end() fully uncorks
+  if (state.corked) {
+    state.corked = 1;
+    this.uncork();
+  }
+
+  // ignore unnecessary end() calls.
+  if (!state.ending && !state.finished)
+    endWritable(this, state, cb);
+};
+
+
+function needFinish(stream, state) {
+  return (state.ending &&
+          state.length === 0 &&
+          !state.finished &&
+          !state.writing);
+}
+
+function prefinish(stream, state) {
+  if (!state.prefinished) {
+    state.prefinished = true;
+    stream.emit('prefinish');
+  }
+}
+
+function finishMaybe(stream, state) {
+  var need = needFinish(stream, state);
+  if (need) {
+    if (state.pendingcb === 0) {
+      prefinish(stream, state);
+      state.finished = true;
+      stream.emit('finish');
+    } else
+      prefinish(stream, state);
+  }
+  return need;
+}
+
+function endWritable(stream, state, cb) {
+  state.ending = true;
+  finishMaybe(stream, state);
+  if (cb) {
+    if (state.finished)
+      process.nextTick(cb);
+    else
+      stream.once('finish', cb);
+  }
+  state.ended = true;
+}

resources/app/node_modules/decompress-zip/node_modules/readable-stream/package.json

@@ -0,0 +1,65 @@
+{
+  "_from": "readable-stream@^1.1.8",
+  "_id": "readable-stream@1.1.14",
+  "_inBundle": false,
+  "_integrity": "sha1-fPTFTvZI44EwhMY23SB54WbAgdk=",
+  "_location": "/decompress-zip/readable-stream",
+  "_phantomChildren": {},
+  "_requested": {
+    "type": "range",
+    "registry": true,
+    "raw": "readable-stream@^1.1.8",
+    "name": "readable-stream",
+    "escapedName": "readable-stream",
+    "rawSpec": "^1.1.8",
+    "saveSpec": null,
+    "fetchSpec": "^1.1.8"
+  },
+  "_requiredBy": [
+    "/decompress-zip"
+  ],
+  "_resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-1.1.14.tgz",
+  "_shasum": "7cf4c54ef648e3813084c636dd2079e166c081d9",
+  "_spec": "readable-stream@^1.1.8",
+  "_where": "D:\\laragon\\www\\UseStudio.CampusInfo-borwers\\resources\\app\\node_modules\\decompress-zip",
+  "author": {
+    "name": "Isaac Z. Schlueter",
+    "email": "i@izs.me",
+    "url": "http://blog.izs.me/"
+  },
+  "browser": {
+    "util": false
+  },
+  "bugs": {
+    "url": "https://github.com/isaacs/readable-stream/issues"
+  },
+  "bundleDependencies": false,
+  "dependencies": {
+    "core-util-is": "~1.0.0",
+    "inherits": "~2.0.1",
+    "isarray": "0.0.1",
+    "string_decoder": "~0.10.x"
+  },
+  "deprecated": false,
+  "description": "Streams3, a user-land copy of the stream library from Node.js v0.11.x",
+  "devDependencies": {
+    "tap": "~0.2.6"
+  },
+  "homepage": "https://github.com/isaacs/readable-stream#readme",
+  "keywords": [
+    "readable",
+    "stream",
+    "pipe"
+  ],
+  "license": "MIT",
+  "main": "readable.js",
+  "name": "readable-stream",
+  "repository": {
+    "type": "git",
+    "url": "git://github.com/isaacs/readable-stream.git"
+  },
+  "scripts": {
+    "test": "tap test/simple/*.js"
+  },
+  "version": "1.1.14"
+}

resources/app/node_modules/decompress-zip/node_modules/readable-stream/passthrough.js

@@ -0,0 +1 @@
+module.exports = require("./lib/_stream_passthrough.js")

resources/app/node_modules/decompress-zip/node_modules/readable-stream/readable.js

@@ -0,0 +1,10 @@
+exports = module.exports = require('./lib/_stream_readable.js');
+exports.Stream = require('stream');
+exports.Readable = exports;
+exports.Writable = require('./lib/_stream_writable.js');
+exports.Duplex = require('./lib/_stream_duplex.js');
+exports.Transform = require('./lib/_stream_transform.js');
+exports.PassThrough = require('./lib/_stream_passthrough.js');
+if (!process.browser && process.env.READABLE_STREAM === 'disable') {
+  module.exports = require('stream');
+}

resources/app/node_modules/decompress-zip/node_modules/readable-stream/transform.js

@@ -0,0 +1 @@
+module.exports = require("./lib/_stream_transform.js")

resources/app/node_modules/decompress-zip/node_modules/readable-stream/writable.js

@@ -0,0 +1 @@
+module.exports = require("./lib/_stream_writable.js")

resources/app/node_modules/deep-extend/CHANGELOG.md

@@ -1,19 +1,36 @@
 Changelog
 =========
 
+v0.5.1
+------
+
+- Fix prototype pollution vulnerability (thanks to @mwakerman for the PR)
+- Avoid using deprecated Buffer API (thanks to @ChALkeR for the PR)
+
+v0.5.0
+------
+
+- Auto-testing provided by Travis CI;
+- Support older Node.JS versions (`v0.11.x` and `v0.10.x`);
+- Removed tests files from npm package.
+
+v0.4.2
+------
+
+- Fix for `null` as an argument.
+
 v0.4.1
 ------
 
 - Removed test code from <b>npm</b> package
   ([see pull request #21](https://github.com/unclechu/node-deep-extend/pull/21));
-- Increased minimal version of Node from 0.4.0 to 0.12.0
+- Increased minimal version of Node from `0.4.0` to `0.12.0`
   (because can't run tests on lesser version anyway).
 
 v0.4.0
 ------
 
-Broken backward compatibility with v0.3.x
-
+- **WARNING!** Broken backward compatibility with `v0.3.x`;
 - Fixed bug with extending arrays instead of cloning;
 - Deep cloning for arrays;
 - Check for own property;

resources/app/node_modules/deep-extend/LICENSE

@@ -1,6 +1,6 @@
 The MIT License (MIT)
 
-Copyright (c) 2013-2015, Viacheslav Lotsmanov
+Copyright (c) 2013-2018, Viacheslav Lotsmanov
 
 Permission is hereby granted, free of charge, to any person obtaining a copy of
 this software and associated documentation files (the "Software"), to deal in

resources/app/node_modules/deep-extend/README.md

@@ -3,7 +3,10 @@ Deep Extend
 
 Recursive object extending.
 
+[![Build Status](https://api.travis-ci.org/unclechu/node-deep-extend.svg?branch=master)](https://travis-ci.org/unclechu/node-deep-extend)
+
 [![NPM](https://nodei.co/npm/deep-extend.png?downloads=true&downloadRank=true&stars=true)](https://nodei.co/npm/deep-extend/)
+
 [![NPM](https://nodei.co/npm-dl/deep-extend.png?height=3)](https://nodei.co/npm/deep-extend/)
 
 Install

resources/app/node_modules/deep-extend/lib/deep-extend.js

@@ -5,7 +5,7 @@
  *
  * The MIT License (MIT)
  *
- * Copyright (c) 2013-2015 Viacheslav Lotsmanov
+ * Copyright (c) 2013-2018 Viacheslav Lotsmanov
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy of
  * this software and associated documentation files (the "Software"), to deal in
@@ -37,7 +37,9 @@ function isSpecificValue(val) {
 
 function cloneSpecificValue(val) {
 	if (val instanceof Buffer) {
-		var x = new Buffer(val.length);
+		var x = Buffer.alloc
+			? Buffer.alloc(val.length)
+			: new Buffer(val.length);
 		val.copy(x);
 		return x;
 	} else if (val instanceof Date) {
@@ -70,6 +72,10 @@ function deepCloneArray(arr) {
 	return clone;
 }
 
+function safeGetProperty(object, property) {
+	return property === '__proto__' ? undefined : object[property];
+}
+
 /**
  * Extening object that entered in first argument.
  *
@@ -102,8 +108,8 @@ var deepExtend = module.exports = function (/*obj_1, [obj_2], [obj_N]*/) {
 		}
 
 		Object.keys(obj).forEach(function (key) {
-			src = target[key]; // source value
-			val = obj[key]; // new value
+			src = safeGetProperty(target, key); // source value
+			val = safeGetProperty(obj, key); // new value
 
 			// recursion prevention
 			if (val === target) {
@@ -141,4 +147,4 @@ var deepExtend = module.exports = function (/*obj_1, [obj_2], [obj_N]*/) {
 	});
 
 	return target;
-}
+};

resources/app/node_modules/deep-extend/package.json

@@ -1,33 +1,27 @@
 {
-  "_args": [
-    [
-      "deep-extend@0.4.2",
-      "E:\\vscode\\UseStudio.Desktop\\resources\\app"
-    ]
-  ],
-  "_development": true,
-  "_from": "deep-extend@0.4.2",
-  "_id": "deep-extend@0.4.2",
+  "_from": "deep-extend@^0.5.1",
+  "_id": "deep-extend@0.5.1",
   "_inBundle": false,
-  "_integrity": "sha1-SLaZwn4zS/ifEIkr5DL25MfTSn8=",
+  "_integrity": "sha512-N8vBdOa+DF7zkRrDCsaOXoCs/E2fJfx9B9MrKnnSiHNh4ws7eSys6YQE4KvT1cecKmOASYQBhbKjeuDD9lT81w==",
   "_location": "/deep-extend",
   "_phantomChildren": {},
   "_requested": {
-    "type": "version",
+    "type": "range",
     "registry": true,
-    "raw": "deep-extend@0.4.2",
+    "raw": "deep-extend@^0.5.1",
     "name": "deep-extend",
     "escapedName": "deep-extend",
-    "rawSpec": "0.4.2",
+    "rawSpec": "^0.5.1",
     "saveSpec": null,
-    "fetchSpec": "0.4.2"
+    "fetchSpec": "^0.5.1"
   },
   "_requiredBy": [
     "/rc"
   ],
-  "_resolved": "https://registry.npmjs.org/deep-extend/-/deep-extend-0.4.2.tgz",
-  "_spec": "0.4.2",
-  "_where": "E:\\vscode\\UseStudio.Desktop\\resources\\app",
+  "_resolved": "https://registry.npmjs.org/deep-extend/-/deep-extend-0.5.1.tgz",
+  "_shasum": "b894a9dd90d3023fbf1c55a394fb858eb2066f1f",
+  "_spec": "deep-extend@^0.5.1",
+  "_where": "D:\\laragon\\www\\UseStudio.CampusInfo-borwers\\resources\\app\\node_modules\\rc",
   "author": {
     "name": "Viacheslav Lotsmanov",
     "email": "lotsmanov89@gmail.com"
@@ -35,6 +29,7 @@
   "bugs": {
     "url": "https://github.com/unclechu/node-deep-extend/issues"
   },
+  "bundleDependencies": false,
   "contributors": [
     {
       "name": "Romain Prieto",
@@ -47,24 +42,25 @@
     {
       "name": "Marshall Bowers",
       "url": "https://github.com/maxdeviant"
+    },
+    {
+      "name": "Misha Wakerman",
+      "url": "https://github.com/mwakerman"
     }
   ],
+  "deprecated": false,
   "description": "Recursive object extending",
   "devDependencies": {
-    "mocha": "^2.2.1",
-    "should": "^5.2.0"
-  },
-  "directories": {
-    "lib": "./lib/",
-    "test": "./test/"
+    "mocha": "2.2.1",
+    "should": "5.2.0"
   },
   "engines": {
     "iojs": ">=1.0.0",
-    "node": ">=0.12.0"
+    "node": ">=0.10.0"
   },
   "files": [
-    "lib/deep-extend.js",
-    "index.js"
+    "index.js",
+    "lib/"
   ],
   "homepage": "https://github.com/unclechu/node-deep-extend",
   "keywords": [
@@ -93,5 +89,5 @@
   "scripts": {
     "test": "mocha"
   },
-  "version": "0.4.2"
+  "version": "0.5.1"
 }

resources/app/node_modules/electron-download/node_modules/debug/.coveralls.yml

@@ -1 +0,0 @@
-repo_token: SIAeZjKYlHK74rbcFvNHMUzjRiMpflxve

resources/app/node_modules/electron-download/node_modules/debug/.npmignore

@@ -1,9 +0,0 @@
-support
-test
-examples
-example
-*.sock
-dist
-yarn.lock
-coverage
-bower.json

resources/app/node_modules/electron-download/node_modules/debug/.travis.yml

@@ -1,14 +0,0 @@
-
-language: node_js
-node_js:
-  - "6"
-  - "5"
-  - "4"
-
-install:
-  - make node_modules
-
-script:
-  - make lint
-  - make test
-  - make coveralls

resources/app/node_modules/electron-download/node_modules/debug/LICENSE

@@ -1,19 +0,0 @@
-(The MIT License)
-
-Copyright (c) 2014 TJ Holowaychuk <tj@vision-media.ca>
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software 
-and associated documentation files (the 'Software'), to deal in the Software without restriction, 
-including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, 
-and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
-subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial 
-portions of the Software.
-
-THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT 
-LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
-WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 
-SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-

resources/app/node_modules/electron-download/node_modules/debug/Makefile

@@ -1,50 +0,0 @@
-# get Makefile directory name: http://stackoverflow.com/a/5982798/376773
-THIS_MAKEFILE_PATH:=$(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))
-THIS_DIR:=$(shell cd $(dir $(THIS_MAKEFILE_PATH));pwd)
-
-# BIN directory
-BIN := $(THIS_DIR)/node_modules/.bin
-
-# Path
-PATH := node_modules/.bin:$(PATH)
-SHELL := /bin/bash
-
-# applications
-NODE ?= $(shell which node)
-YARN ?= $(shell which yarn)
-PKG ?= $(if $(YARN),$(YARN),$(NODE) $(shell which npm))
-BROWSERIFY ?= $(NODE) $(BIN)/browserify
-
-.FORCE:
-
-install: node_modules
-
-node_modules: package.json
-	@NODE_ENV= $(PKG) install
-	@touch node_modules
-
-lint: .FORCE
-	eslint browser.js debug.js index.js node.js
-
-test-node: .FORCE
-	istanbul cover node_modules/mocha/bin/_mocha -- test/**.js
-
-test-browser: .FORCE
-	mkdir -p dist
-
-	@$(BROWSERIFY) \
-		--standalone debug \
-		. > dist/debug.js
-
-	karma start --single-run
-	rimraf dist
-
-test: .FORCE
-	concurrently \
-		"make test-node" \
-		"make test-browser"
-
-coveralls:
-	cat ./coverage/lcov.info | ./node_modules/coveralls/bin/coveralls.js
-
-.PHONY: all install clean distclean

resources/app/node_modules/electron-download/node_modules/debug/component.json

@@ -1,19 +0,0 @@
-{
-  "name": "debug",
-  "repo": "visionmedia/debug",
-  "description": "small debugging utility",
-  "version": "2.6.9",
-  "keywords": [
-    "debug",
-    "log",
-    "debugger"
-  ],
-  "main": "src/browser.js",
-  "scripts": [
-    "src/browser.js",
-    "src/debug.js"
-  ],
-  "dependencies": {
-    "rauchg/ms.js": "0.7.1"
-  }
-}

resources/app/node_modules/electron-download/node_modules/debug/karma.conf.js

@@ -1,70 +0,0 @@
-// Karma configuration
-// Generated on Fri Dec 16 2016 13:09:51 GMT+0000 (UTC)
-
-module.exports = function(config) {
-  config.set({
-
-    // base path that will be used to resolve all patterns (eg. files, exclude)
-    basePath: '',
-
-
-    // frameworks to use
-    // available frameworks: https://npmjs.org/browse/keyword/karma-adapter
-    frameworks: ['mocha', 'chai', 'sinon'],
-
-
-    // list of files / patterns to load in the browser
-    files: [
-      'dist/debug.js',
-      'test/*spec.js'
-    ],
-
-
-    // list of files to exclude
-    exclude: [
-      'src/node.js'
-    ],
-
-
-    // preprocess matching files before serving them to the browser
-    // available preprocessors: https://npmjs.org/browse/keyword/karma-preprocessor
-    preprocessors: {
-    },
-
-    // test results reporter to use
-    // possible values: 'dots', 'progress'
-    // available reporters: https://npmjs.org/browse/keyword/karma-reporter
-    reporters: ['progress'],
-
-
-    // web server port
-    port: 9876,
-
-
-    // enable / disable colors in the output (reporters and logs)
-    colors: true,
-
-
-    // level of logging
-    // possible values: config.LOG_DISABLE || config.LOG_ERROR || config.LOG_WARN || config.LOG_INFO || config.LOG_DEBUG
-    logLevel: config.LOG_INFO,
-
-
-    // enable / disable watching file and executing tests whenever any file changes
-    autoWatch: true,
-
-
-    // start these browsers
-    // available browser launchers: https://npmjs.org/browse/keyword/karma-launcher
-    browsers: ['PhantomJS'],
-
-
-    // Continuous Integration mode
-    // if true, Karma captures browsers, runs the tests and exits
-    singleRun: false,
-
-    // Concurrency level
-    // how many browser should be started simultaneous
-    concurrency: Infinity
-  })
-}

resources/app/node_modules/electron-download/node_modules/debug/node.js

@@ -1 +0,0 @@
-module.exports = require('./src/node');

resources/app/node_modules/electron-download/node_modules/debug/package.json

@@ -1,92 +0,0 @@
-{
-  "_args": [
-    [
-      "debug@2.6.9",
-      "E:\\vscode\\UseStudio.Desktop\\resources\\app"
-    ]
-  ],
-  "_development": true,
-  "_from": "debug@2.6.9",
-  "_id": "debug@2.6.9",
-  "_inBundle": false,
-  "_integrity": "sha512-bC7ElrdJaJnPbAP+1EotYvqZsb3ecl5wi6Bfi6BJTUcNowp6cvspg0jXznRTKDjm/E7AdgFBVeAPVMNcKGsHMA==",
-  "_location": "/electron-download/debug",
-  "_phantomChildren": {},
-  "_requested": {
-    "type": "version",
-    "registry": true,
-    "raw": "debug@2.6.9",
-    "name": "debug",
-    "escapedName": "debug",
-    "rawSpec": "2.6.9",
-    "saveSpec": null,
-    "fetchSpec": "2.6.9"
-  },
-  "_requiredBy": [
-    "/electron-download"
-  ],
-  "_resolved": "https://registry.npmjs.org/debug/-/debug-2.6.9.tgz",
-  "_spec": "2.6.9",
-  "_where": "E:\\vscode\\UseStudio.Desktop\\resources\\app",
-  "author": {
-    "name": "TJ Holowaychuk",
-    "email": "tj@vision-media.ca"
-  },
-  "browser": "./src/browser.js",
-  "bugs": {
-    "url": "https://github.com/visionmedia/debug/issues"
-  },
-  "component": {
-    "scripts": {
-      "debug/index.js": "browser.js",
-      "debug/debug.js": "debug.js"
-    }
-  },
-  "contributors": [
-    {
-      "name": "Nathan Rajlich",
-      "email": "nathan@tootallnate.net",
-      "url": "http://n8.io"
-    },
-    {
-      "name": "Andrew Rhyne",
-      "email": "rhyneandrew@gmail.com"
-    }
-  ],
-  "dependencies": {
-    "ms": "2.0.0"
-  },
-  "description": "small debugging utility",
-  "devDependencies": {
-    "browserify": "9.0.3",
-    "chai": "^3.5.0",
-    "concurrently": "^3.1.0",
-    "coveralls": "^2.11.15",
-    "eslint": "^3.12.1",
-    "istanbul": "^0.4.5",
-    "karma": "^1.3.0",
-    "karma-chai": "^0.1.0",
-    "karma-mocha": "^1.3.0",
-    "karma-phantomjs-launcher": "^1.0.2",
-    "karma-sinon": "^1.0.5",
-    "mocha": "^3.2.0",
-    "mocha-lcov-reporter": "^1.2.0",
-    "rimraf": "^2.5.4",
-    "sinon": "^1.17.6",
-    "sinon-chai": "^2.8.0"
-  },
-  "homepage": "https://github.com/visionmedia/debug#readme",
-  "keywords": [
-    "debug",
-    "log",
-    "debugger"
-  ],
-  "license": "MIT",
-  "main": "./src/index.js",
-  "name": "debug",
-  "repository": {
-    "type": "git",
-    "url": "git://github.com/visionmedia/debug.git"
-  },
-  "version": "2.6.9"
-}

resources/app/node_modules/electron-download/node_modules/debug/src/index.js

@@ -1,10 +0,0 @@
-/**
- * Detect Electron renderer process, which is node, but we should
- * treat as a browser.
- */
-
-if (typeof process !== 'undefined' && process.type === 'renderer') {
-  module.exports = require('./browser.js');
-} else {
-  module.exports = require('./node.js');
-}

resources/app/node_modules/electron-download/node_modules/debug/src/inspector-log.js

@@ -1,15 +0,0 @@
-module.exports = inspectorLog;
-
-// black hole
-const nullStream = new (require('stream').Writable)();
-nullStream._write = () => {};
-
-/**
- * Outputs a `console.log()` to the Node.js Inspector console *only*.
- */
-function inspectorLog() {
-  const stdout = console._stdout;
-  console._stdout = nullStream;
-  console.log.apply(console, arguments);
-  console._stdout = stdout;
-}

resources/app/node_modules/electron-osx-sign/node_modules/debug/.coveralls.yml

@@ -1 +0,0 @@
-repo_token: SIAeZjKYlHK74rbcFvNHMUzjRiMpflxve

resources/app/node_modules/electron-osx-sign/node_modules/debug/.eslintrc

@@ -1,11 +0,0 @@
-{
-  "env": {
-    "browser": true,
-    "node": true
-  },
-  "rules": {
-    "no-console": 0,
-    "no-empty": [1, { "allowEmptyCatch": true }]
-  },
-  "extends": "eslint:recommended"
-}

resources/app/node_modules/electron-osx-sign/node_modules/debug/.npmignore

@@ -1,9 +0,0 @@
-support
-test
-examples
-example
-*.sock
-dist
-yarn.lock
-coverage
-bower.json

resources/app/node_modules/electron-osx-sign/node_modules/debug/.travis.yml

@@ -1,14 +0,0 @@
-
-language: node_js
-node_js:
-  - "6"
-  - "5"
-  - "4"
-
-install:
-  - make node_modules
-
-script:
-  - make lint
-  - make test
-  - make coveralls

resources/app/node_modules/electron-osx-sign/node_modules/debug/LICENSE

@@ -1,19 +0,0 @@
-(The MIT License)
-
-Copyright (c) 2014 TJ Holowaychuk <tj@vision-media.ca>
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software 
-and associated documentation files (the 'Software'), to deal in the Software without restriction, 
-including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, 
-and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
-subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial 
-portions of the Software.
-
-THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT 
-LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
-WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 
-SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-

resources/app/node_modules/electron-osx-sign/node_modules/debug/component.json

@@ -1,19 +0,0 @@
-{
-  "name": "debug",
-  "repo": "visionmedia/debug",
-  "description": "small debugging utility",
-  "version": "2.6.9",
-  "keywords": [
-    "debug",
-    "log",
-    "debugger"
-  ],
-  "main": "src/browser.js",
-  "scripts": [
-    "src/browser.js",
-    "src/debug.js"
-  ],
-  "dependencies": {
-    "rauchg/ms.js": "0.7.1"
-  }
-}

resources/app/node_modules/electron-osx-sign/node_modules/debug/karma.conf.js

@@ -1,70 +0,0 @@
-// Karma configuration
-// Generated on Fri Dec 16 2016 13:09:51 GMT+0000 (UTC)
-
-module.exports = function(config) {
-  config.set({
-
-    // base path that will be used to resolve all patterns (eg. files, exclude)
-    basePath: '',
-
-
-    // frameworks to use
-    // available frameworks: https://npmjs.org/browse/keyword/karma-adapter
-    frameworks: ['mocha', 'chai', 'sinon'],
-
-
-    // list of files / patterns to load in the browser
-    files: [
-      'dist/debug.js',
-      'test/*spec.js'
-    ],
-
-
-    // list of files to exclude
-    exclude: [
-      'src/node.js'
-    ],
-
-
-    // preprocess matching files before serving them to the browser
-    // available preprocessors: https://npmjs.org/browse/keyword/karma-preprocessor
-    preprocessors: {
-    },
-
-    // test results reporter to use
-    // possible values: 'dots', 'progress'
-    // available reporters: https://npmjs.org/browse/keyword/karma-reporter
-    reporters: ['progress'],
-
-
-    // web server port
-    port: 9876,
-
-
-    // enable / disable colors in the output (reporters and logs)
-    colors: true,
-
-
-    // level of logging
-    // possible values: config.LOG_DISABLE || config.LOG_ERROR || config.LOG_WARN || config.LOG_INFO || config.LOG_DEBUG
-    logLevel: config.LOG_INFO,
-
-
-    // enable / disable watching file and executing tests whenever any file changes
-    autoWatch: true,
-
-
-    // start these browsers
-    // available browser launchers: https://npmjs.org/browse/keyword/karma-launcher
-    browsers: ['PhantomJS'],
-
-
-    // Continuous Integration mode
-    // if true, Karma captures browsers, runs the tests and exits
-    singleRun: false,
-
-    // Concurrency level
-    // how many browser should be started simultaneous
-    concurrency: Infinity
-  })
-}

resources/app/node_modules/electron-osx-sign/node_modules/debug/node.js

@@ -1 +0,0 @@
-module.exports = require('./src/node');

resources/app/node_modules/electron-osx-sign/node_modules/debug/package.json

@@ -1,92 +0,0 @@
-{
-  "_args": [
-    [
-      "debug@2.6.9",
-      "E:\\vscode\\UseStudio.Desktop\\resources\\app"
-    ]
-  ],
-  "_development": true,
-  "_from": "debug@2.6.9",
-  "_id": "debug@2.6.9",
-  "_inBundle": false,
-  "_integrity": "sha512-bC7ElrdJaJnPbAP+1EotYvqZsb3ecl5wi6Bfi6BJTUcNowp6cvspg0jXznRTKDjm/E7AdgFBVeAPVMNcKGsHMA==",
-  "_location": "/electron-osx-sign/debug",
-  "_phantomChildren": {},
-  "_requested": {
-    "type": "version",
-    "registry": true,
-    "raw": "debug@2.6.9",
-    "name": "debug",
-    "escapedName": "debug",
-    "rawSpec": "2.6.9",
-    "saveSpec": null,
-    "fetchSpec": "2.6.9"
-  },
-  "_requiredBy": [
-    "/electron-osx-sign"
-  ],
-  "_resolved": "https://registry.npmjs.org/debug/-/debug-2.6.9.tgz",
-  "_spec": "2.6.9",
-  "_where": "E:\\vscode\\UseStudio.Desktop\\resources\\app",
-  "author": {
-    "name": "TJ Holowaychuk",
-    "email": "tj@vision-media.ca"
-  },
-  "browser": "./src/browser.js",
-  "bugs": {
-    "url": "https://github.com/visionmedia/debug/issues"
-  },
-  "component": {
-    "scripts": {
-      "debug/index.js": "browser.js",
-      "debug/debug.js": "debug.js"
-    }
-  },
-  "contributors": [
-    {
-      "name": "Nathan Rajlich",
-      "email": "nathan@tootallnate.net",
-      "url": "http://n8.io"
-    },
-    {
-      "name": "Andrew Rhyne",
-      "email": "rhyneandrew@gmail.com"
-    }
-  ],
-  "dependencies": {
-    "ms": "2.0.0"
-  },
-  "description": "small debugging utility",
-  "devDependencies": {
-    "browserify": "9.0.3",
-    "chai": "^3.5.0",
-    "concurrently": "^3.1.0",
-    "coveralls": "^2.11.15",
-    "eslint": "^3.12.1",
-    "istanbul": "^0.4.5",
-    "karma": "^1.3.0",
-    "karma-chai": "^0.1.0",
-    "karma-mocha": "^1.3.0",
-    "karma-phantomjs-launcher": "^1.0.2",
-    "karma-sinon": "^1.0.5",
-    "mocha": "^3.2.0",
-    "mocha-lcov-reporter": "^1.2.0",
-    "rimraf": "^2.5.4",
-    "sinon": "^1.17.6",
-    "sinon-chai": "^2.8.0"
-  },
-  "homepage": "https://github.com/visionmedia/debug#readme",
-  "keywords": [
-    "debug",
-    "log",
-    "debugger"
-  ],
-  "license": "MIT",
-  "main": "./src/index.js",
-  "name": "debug",
-  "repository": {
-    "type": "git",
-    "url": "git://github.com/visionmedia/debug.git"
-  },
-  "version": "2.6.9"
-}

resources/app/node_modules/electron-osx-sign/node_modules/debug/src/debug.js

@@ -1,202 +0,0 @@
-
-/**
- * This is the common logic for both the Node.js and web browser
- * implementations of `debug()`.
- *
- * Expose `debug()` as the module.
- */
-
-exports = module.exports = createDebug.debug = createDebug['default'] = createDebug;
-exports.coerce = coerce;
-exports.disable = disable;
-exports.enable = enable;
-exports.enabled = enabled;
-exports.humanize = require('ms');
-
-/**
- * The currently active debug mode names, and names to skip.
- */
-
-exports.names = [];
-exports.skips = [];
-
-/**
- * Map of special "%n" handling functions, for the debug "format" argument.
- *
- * Valid key names are a single, lower or upper-case letter, i.e. "n" and "N".
- */
-
-exports.formatters = {};
-
-/**
- * Previous log timestamp.
- */
-
-var prevTime;
-
-/**
- * Select a color.
- * @param {String} namespace
- * @return {Number}
- * @api private
- */
-
-function selectColor(namespace) {
-  var hash = 0, i;
-
-  for (i in namespace) {
-    hash  = ((hash << 5) - hash) + namespace.charCodeAt(i);
-    hash |= 0; // Convert to 32bit integer
-  }
-
-  return exports.colors[Math.abs(hash) % exports.colors.length];
-}
-
-/**
- * Create a debugger with the given `namespace`.
- *
- * @param {String} namespace
- * @return {Function}
- * @api public
- */
-
-function createDebug(namespace) {
-
-  function debug() {
-    // disabled?
-    if (!debug.enabled) return;
-
-    var self = debug;
-
-    // set `diff` timestamp
-    var curr = +new Date();
-    var ms = curr - (prevTime || curr);
-    self.diff = ms;
-    self.prev = prevTime;
-    self.curr = curr;
-    prevTime = curr;
-
-    // turn the `arguments` into a proper Array
-    var args = new Array(arguments.length);
-    for (var i = 0; i < args.length; i++) {
-      args[i] = arguments[i];
-    }
-
-    args[0] = exports.coerce(args[0]);
-
-    if ('string' !== typeof args[0]) {
-      // anything else let's inspect with %O
-      args.unshift('%O');
-    }
-
-    // apply any `formatters` transformations
-    var index = 0;
-    args[0] = args[0].replace(/%([a-zA-Z%])/g, function(match, format) {
-      // if we encounter an escaped % then don't increase the array index
-      if (match === '%%') return match;
-      index++;
-      var formatter = exports.formatters[format];
-      if ('function' === typeof formatter) {
-        var val = args[index];
-        match = formatter.call(self, val);
-
-        // now we need to remove `args[index]` since it's inlined in the `format`
-        args.splice(index, 1);
-        index--;
-      }
-      return match;
-    });
-
-    // apply env-specific formatting (colors, etc.)
-    exports.formatArgs.call(self, args);
-
-    var logFn = debug.log || exports.log || console.log.bind(console);
-    logFn.apply(self, args);
-  }
-
-  debug.namespace = namespace;
-  debug.enabled = exports.enabled(namespace);
-  debug.useColors = exports.useColors();
-  debug.color = selectColor(namespace);
-
-  // env-specific initialization logic for debug instances
-  if ('function' === typeof exports.init) {
-    exports.init(debug);
-  }
-
-  return debug;
-}
-
-/**
- * Enables a debug mode by namespaces. This can include modes
- * separated by a colon and wildcards.
- *
- * @param {String} namespaces
- * @api public
- */
-
-function enable(namespaces) {
-  exports.save(namespaces);
-
-  exports.names = [];
-  exports.skips = [];
-
-  var split = (typeof namespaces === 'string' ? namespaces : '').split(/[\s,]+/);
-  var len = split.length;
-
-  for (var i = 0; i < len; i++) {
-    if (!split[i]) continue; // ignore empty strings
-    namespaces = split[i].replace(/\*/g, '.*?');
-    if (namespaces[0] === '-') {
-      exports.skips.push(new RegExp('^' + namespaces.substr(1) + '$'));
-    } else {
-      exports.names.push(new RegExp('^' + namespaces + '$'));
-    }
-  }
-}
-
-/**
- * Disable debug output.
- *
- * @api public
- */
-
-function disable() {
-  exports.enable('');
-}
-
-/**
- * Returns true if the given mode name is enabled, false otherwise.
- *
- * @param {String} name
- * @return {Boolean}
- * @api public
- */
-
-function enabled(name) {
-  var i, len;
-  for (i = 0, len = exports.skips.length; i < len; i++) {
-    if (exports.skips[i].test(name)) {
-      return false;
-    }
-  }
-  for (i = 0, len = exports.names.length; i < len; i++) {
-    if (exports.names[i].test(name)) {
-      return true;
-    }
-  }
-  return false;
-}
-
-/**
- * Coerce `val`.
- *
- * @param {Mixed} val
- * @return {Mixed}
- * @api private
- */
-
-function coerce(val) {
-  if (val instanceof Error) return val.stack || val.message;
-  return val;
-}

resources/app/node_modules/electron-osx-sign/node_modules/debug/src/inspector-log.js

@@ -1,15 +0,0 @@
-module.exports = inspectorLog;
-
-// black hole
-const nullStream = new (require('stream').Writable)();
-nullStream._write = () => {};
-
-/**
- * Outputs a `console.log()` to the Node.js Inspector console *only*.
- */
-function inspectorLog() {
-  const stdout = console._stdout;
-  console._stdout = nullStream;
-  console.log.apply(console, arguments);
-  console._stdout = stdout;
-}

resources/app/node_modules/electron-download/node_modules/debug/.eslintrc

@@ -3,6 +3,9 @@
     "browser": true,
     "node": true
   },
+  "globals": {
+    "chrome": true
+  },
   "rules": {
     "no-console": 0,
     "no-empty": [1, { "allowEmptyCatch": true }]

resources/app/node_modules/electron-packager/node_modules/debug/.travis.yml

@@ -0,0 +1,20 @@
+sudo: false
+
+language: node_js
+
+node_js:
+  - "4"
+  - "6"
+  - "8"
+
+install:
+  - make install
+
+script:
+  - make lint
+  - make test
+
+matrix:
+  include:
+  - node_js: '8'
+    env: BROWSER=1

resources/app/node_modules/electron-download/node_modules/debug/CHANGELOG.md

@@ -1,4 +1,37 @@
 
+3.1.0 / 2017-09-26
+==================
+
+  * Add `DEBUG_HIDE_DATE` env var (#486)
+  * Remove ReDoS regexp in %o formatter (#504)
+  * Remove "component" from package.json
+  * Remove `component.json`
+  * Ignore package-lock.json
+  * Examples: fix colors printout
+  * Fix: browser detection
+  * Fix: spelling mistake (#496, @EdwardBetts)
+
+3.0.1 / 2017-08-24
+==================
+
+  * Fix: Disable colors in Edge and Internet Explorer (#489)
+
+3.0.0 / 2017-08-08
+==================
+
+  * Breaking: Remove DEBUG_FD (#406)
+  * Breaking: Use `Date#toISOString()` instead to `Date#toUTCString()` when output is not a TTY (#418)
+  * Breaking: Make millisecond timer namespace specific and allow 'always enabled' output (#408)
+  * Addition: document `enabled` flag (#465)
+  * Addition: add 256 colors mode (#481)
+  * Addition: `enabled()` updates existing debug instances, add `destroy()` function (#440)
+  * Update: component: update "ms" to v2.0.0
+  * Update: separate the Node and Browser tests in Travis-CI
+  * Update: refactor Readme, fixed documentation, added "Namespace Colors" section, redid screenshots
+  * Update: separate Node.js and web browser examples for organization
+  * Update: update "browserify" to v14.4.0
+  * Fix: fix Readme typo (#473)
+
 2.6.9 / 2017-09-22
 ==================
 
@@ -27,7 +60,7 @@
 2.6.4 / 2017-04-20
 ==================
 
-  * Fix: bug that would occure if process.env.DEBUG is a non-string value. (#444, @LucianBuzzo)
+  * Fix: bug that would occur if process.env.DEBUG is a non-string value. (#444, @LucianBuzzo)
   * Chore: ignore bower.json in npm installations. (#437, @joaovieira)
   * Misc: update "ms" to v0.7.3 (@tootallnate)
 

resources/app/node_modules/electron-osx-sign/node_modules/debug/Makefile

@@ -15,36 +15,44 @@ YARN ?= $(shell which yarn)
 PKG ?= $(if $(YARN),$(YARN),$(NODE) $(shell which npm))
 BROWSERIFY ?= $(NODE) $(BIN)/browserify
 
-.FORCE:
-
 install: node_modules
 
+browser: dist/debug.js
+
 node_modules: package.json
 	@NODE_ENV= $(PKG) install
 	@touch node_modules
 
-lint: .FORCE
-	eslint browser.js debug.js index.js node.js
-
-test-node: .FORCE
-	istanbul cover node_modules/mocha/bin/_mocha -- test/**.js
-
-test-browser: .FORCE
-	mkdir -p dist
-
+dist/debug.js: src/*.js node_modules
+	@mkdir -p dist
 	@$(BROWSERIFY) \
 		--standalone debug \
 		. > dist/debug.js
 
-	karma start --single-run
-	rimraf dist
+lint:
+	@eslint *.js src/*.js
+
+test-node:
+	@istanbul cover node_modules/mocha/bin/_mocha -- test/**.js
+	@cat ./coverage/lcov.info | ./node_modules/coveralls/bin/coveralls.js
 
-test: .FORCE
-	concurrently \
+test-browser:
+	@$(MAKE) browser
+	@karma start --single-run
+
+test-all:
+	@concurrently \
 		"make test-node" \
 		"make test-browser"
 
-coveralls:
-	cat ./coverage/lcov.info | ./node_modules/coveralls/bin/coveralls.js
+test:
+	@if [ "x$(BROWSER)" = "x" ]; then \
+		$(MAKE) test-node; \
+		else \
+		$(MAKE) test-browser; \
+	fi
+
+clean:
+	rimraf dist coverage
 
-.PHONY: all install clean distclean
+.PHONY: browser install clean lint test test-all test-node test-browser

resources/app/node_modules/electron/node_modules/debug/package.json

@@ -1,28 +1,27 @@
 {
-  "_from": "debug@^2.2.0",
-  "_id": "debug@2.6.9",
+  "_from": "debug@^3.0.0",
+  "_id": "debug@3.1.0",
   "_inBundle": false,
-  "_integrity": "sha512-bC7ElrdJaJnPbAP+1EotYvqZsb3ecl5wi6Bfi6BJTUcNowp6cvspg0jXznRTKDjm/E7AdgFBVeAPVMNcKGsHMA==",
-  "_location": "/electron/debug",
+  "_integrity": "sha512-OX8XqP7/1a9cqkxYw2yXss15f26NKWBpDXQd0/uK/KPqdQhxbPa994hnzjcE2VqQpDslf55723cKPUOGSmMY3g==",
+  "_location": "/electron-packager/debug",
   "_phantomChildren": {},
   "_requested": {
     "type": "range",
     "registry": true,
-    "raw": "debug@^2.2.0",
+    "raw": "debug@^3.0.0",
     "name": "debug",
     "escapedName": "debug",
-    "rawSpec": "^2.2.0",
+    "rawSpec": "^3.0.0",
     "saveSpec": null,
-    "fetchSpec": "^2.2.0"
+    "fetchSpec": "^3.0.0"
   },
   "_requiredBy": [
-    "/electron/electron-download",
-    "/electron/sumchecker"
+    "/electron-packager"
   ],
-  "_resolved": "https://registry.npmjs.org/debug/-/debug-2.6.9.tgz",
-  "_shasum": "5d128515df134ff327e90a4c93f4e077a536341f",
-  "_spec": "debug@^2.2.0",
-  "_where": "E:\\vscode\\UseStudio.Desktop\\resources\\app\\node_modules\\electron\\node_modules\\electron-download",
+  "_resolved": "https://registry.npmjs.org/debug/-/debug-3.1.0.tgz",
+  "_shasum": "5bb5a0672628b64149566ba16819e61518c67261",
+  "_spec": "debug@^3.0.0",
+  "_where": "D:\\laragon\\www\\UseStudio.CampusInfo-borwers\\resources\\app\\node_modules\\electron-packager",
   "author": {
     "name": "TJ Holowaychuk",
     "email": "tj@vision-media.ca"
@@ -32,12 +31,6 @@
     "url": "https://github.com/visionmedia/debug/issues"
   },
   "bundleDependencies": false,
-  "component": {
-    "scripts": {
-      "debug/index.js": "browser.js",
-      "debug/debug.js": "debug.js"
-    }
-  },
   "contributors": [
     {
       "name": "Nathan Rajlich",
@@ -55,7 +48,7 @@
   "deprecated": false,
   "description": "small debugging utility",
   "devDependencies": {
-    "browserify": "9.0.3",
+    "browserify": "14.4.0",
     "chai": "^3.5.0",
     "concurrently": "^3.1.0",
     "coveralls": "^2.11.15",
@@ -85,5 +78,5 @@
     "type": "git",
     "url": "git://github.com/visionmedia/debug.git"
   },
-  "version": "2.6.9"
+  "version": "3.1.0"
 }

resources/app/node_modules/electron-osx-sign/node_modules/debug/src/browser.js

@@ -20,12 +20,17 @@ exports.storage = 'undefined' != typeof chrome
  */
 
 exports.colors = [
-  'lightseagreen',
-  'forestgreen',
-  'goldenrod',
-  'dodgerblue',
-  'darkorchid',
-  'crimson'
+  '#0000CC', '#0000FF', '#0033CC', '#0033FF', '#0066CC', '#0066FF', '#0099CC',
+  '#0099FF', '#00CC00', '#00CC33', '#00CC66', '#00CC99', '#00CCCC', '#00CCFF',
+  '#3300CC', '#3300FF', '#3333CC', '#3333FF', '#3366CC', '#3366FF', '#3399CC',
+  '#3399FF', '#33CC00', '#33CC33', '#33CC66', '#33CC99', '#33CCCC', '#33CCFF',
+  '#6600CC', '#6600FF', '#6633CC', '#6633FF', '#66CC00', '#66CC33', '#9900CC',
+  '#9900FF', '#9933CC', '#9933FF', '#99CC00', '#99CC33', '#CC0000', '#CC0033',
+  '#CC0066', '#CC0099', '#CC00CC', '#CC00FF', '#CC3300', '#CC3333', '#CC3366',
+  '#CC3399', '#CC33CC', '#CC33FF', '#CC6600', '#CC6633', '#CC9900', '#CC9933',
+  '#CCCC00', '#CCCC33', '#FF0000', '#FF0033', '#FF0066', '#FF0099', '#FF00CC',
+  '#FF00FF', '#FF3300', '#FF3333', '#FF3366', '#FF3399', '#FF33CC', '#FF33FF',
+  '#FF6600', '#FF6633', '#FF9900', '#FF9933', '#FFCC00', '#FFCC33'
 ];
 
 /**
@@ -44,6 +49,11 @@ function useColors() {
     return true;
   }
 
+  // Internet Explorer and Edge do not support colors.
+  if (typeof navigator !== 'undefined' && navigator.userAgent && navigator.userAgent.toLowerCase().match(/(edge|trident)\/(\d+)/)) {
+    return false;
+  }
+
   // is webkit? http://stackoverflow.com/a/16459606/376773
   // document is undefined in react-native: https://github.com/facebook/react-native/pull/1632
   return (typeof document !== 'undefined' && document.documentElement && document.documentElement.style && document.documentElement.style.WebkitAppearance) ||

resources/app/node_modules/electron/node_modules/debug/src/debug.js

@@ -14,6 +14,11 @@ exports.enabled = enabled;
 exports.humanize = require('ms');
 
 /**
+ * Active `debug` instances.
+ */
+exports.instances = [];
+
+/**
  * The currently active debug mode names, and names to skip.
  */
 
@@ -29,12 +34,6 @@ exports.skips = [];
 exports.formatters = {};
 
 /**
- * Previous log timestamp.
- */
-
-var prevTime;
-
-/**
  * Select a color.
  * @param {String} namespace
  * @return {Number}
@@ -62,6 +61,8 @@ function selectColor(namespace) {
 
 function createDebug(namespace) {
 
+  var prevTime;
+
   function debug() {
     // disabled?
     if (!debug.enabled) return;
@@ -118,15 +119,28 @@ function createDebug(namespace) {
   debug.enabled = exports.enabled(namespace);
   debug.useColors = exports.useColors();
   debug.color = selectColor(namespace);
+  debug.destroy = destroy;
 
   // env-specific initialization logic for debug instances
   if ('function' === typeof exports.init) {
     exports.init(debug);
   }
 
+  exports.instances.push(debug);
+
   return debug;
 }
 
+function destroy () {
+  var index = exports.instances.indexOf(this);
+  if (index !== -1) {
+    exports.instances.splice(index, 1);
+    return true;
+  } else {
+    return false;
+  }
+}
+
 /**
  * Enables a debug mode by namespaces. This can include modes
  * separated by a colon and wildcards.
@@ -141,10 +155,11 @@ function enable(namespaces) {
   exports.names = [];
   exports.skips = [];
 
+  var i;
   var split = (typeof namespaces === 'string' ? namespaces : '').split(/[\s,]+/);
   var len = split.length;
 
-  for (var i = 0; i < len; i++) {
+  for (i = 0; i < len; i++) {
     if (!split[i]) continue; // ignore empty strings
     namespaces = split[i].replace(/\*/g, '.*?');
     if (namespaces[0] === '-') {
@@ -153,6 +168,11 @@ function enable(namespaces) {
       exports.names.push(new RegExp('^' + namespaces + '$'));
     }
   }
+
+  for (i = 0; i < exports.instances.length; i++) {
+    var instance = exports.instances[i];
+    instance.enabled = exports.enabled(instance.namespace);
+  }
 }
 
 /**
@@ -174,6 +194,9 @@ function disable() {
  */
 
 function enabled(name) {
+  if (name[name.length - 1] === '*') {
+    return true;
+  }
   var i, len;
   for (i = 0, len = exports.skips.length; i < len; i++) {
     if (exports.skips[i].test(name)) {

resources/app/node_modules/electron-osx-sign/node_modules/debug/src/index.js

@@ -3,7 +3,7 @@
  * treat as a browser.
  */
 
-if (typeof process !== 'undefined' && process.type === 'renderer') {
+if (typeof process === 'undefined' || process.type === 'renderer') {
   module.exports = require('./browser.js');
 } else {
   module.exports = require('./node.js');

resources/app/node_modules/electron-download/node_modules/debug/src/node.js

@@ -23,7 +23,22 @@ exports.useColors = useColors;
  * Colors.
  */
 
-exports.colors = [6, 2, 3, 4, 5, 1];
+exports.colors = [ 6, 2, 3, 4, 5, 1 ];
+
+try {
+  var supportsColor = require('supports-color');
+  if (supportsColor && supportsColor.level >= 2) {
+    exports.colors = [
+      20, 21, 26, 27, 32, 33, 38, 39, 40, 41, 42, 43, 44, 45, 56, 57, 62, 63, 68,
+      69, 74, 75, 76, 77, 78, 79, 80, 81, 92, 93, 98, 99, 112, 113, 128, 129, 134,
+      135, 148, 149, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171,
+      172, 173, 178, 179, 184, 185, 196, 197, 198, 199, 200, 201, 202, 203, 204,
+      205, 206, 207, 208, 209, 214, 215, 220, 221
+    ];
+  }
+} catch (err) {
+  // swallow - we only care if `supports-color` is available; it doesn't have to be.
+}
 
 /**
  * Build up the default `inspectOpts` object from the environment variables.
@@ -52,30 +67,13 @@ exports.inspectOpts = Object.keys(process.env).filter(function (key) {
 }, {});
 
 /**
- * The file descriptor to write the `debug()` calls to.
- * Set the `DEBUG_FD` env variable to override with another value. i.e.:
- *
- *   $ DEBUG_FD=3 node script.js 3>debug.log
- */
-
-var fd = parseInt(process.env.DEBUG_FD, 10) || 2;
-
-if (1 !== fd && 2 !== fd) {
-  util.deprecate(function(){}, 'except for stderr(2) and stdout(1), any other usage of DEBUG_FD is deprecated. Override debug.log if you want to use a different log function (https://git.io/debug_fd)')()
-}
-
-var stream = 1 === fd ? process.stdout :
-             2 === fd ? process.stderr :
-             createWritableStdioStream(fd);
-
-/**
  * Is stdout a TTY? Colored output is enabled when `true`.
  */
 
 function useColors() {
   return 'colors' in exports.inspectOpts
     ? Boolean(exports.inspectOpts.colors)
-    : tty.isatty(fd);
+    : tty.isatty(process.stderr.fd);
 }
 
 /**
@@ -111,22 +109,30 @@ function formatArgs(args) {
 
   if (useColors) {
     var c = this.color;
-    var prefix = '  \u001b[3' + c + ';1m' + name + ' ' + '\u001b[0m';
+    var colorCode = '\u001b[3' + (c < 8 ? c : '8;5;' + c);
+    var prefix = '  ' + colorCode + ';1m' + name + ' ' + '\u001b[0m';
 
     args[0] = prefix + args[0].split('\n').join('\n' + prefix);
-    args.push('\u001b[3' + c + 'm+' + exports.humanize(this.diff) + '\u001b[0m');
+    args.push(colorCode + 'm+' + exports.humanize(this.diff) + '\u001b[0m');
+  } else {
+    args[0] = getDate() + name + ' ' + args[0];
+  }
+}
+
+function getDate() {
+  if (exports.inspectOpts.hideDate) {
+    return '';
   } else {
-    args[0] = new Date().toUTCString()
-      + ' ' + name + ' ' + args[0];
+    return new Date().toISOString() + ' ';
   }
 }
 
 /**
- * Invokes `util.format()` with the specified arguments and writes to `stream`.
+ * Invokes `util.format()` with the specified arguments and writes to stderr.
  */
 
 function log() {
-  return stream.write(util.format.apply(util, arguments) + '\n');
+  return process.stderr.write(util.format.apply(util, arguments) + '\n');
 }
 
 /**
@@ -158,74 +164,6 @@ function load() {
 }
 
 /**
- * Copied from `node/src/node.js`.
- *
- * XXX: It's lame that node doesn't expose this API out-of-the-box. It also
- * relies on the undocumented `tty_wrap.guessHandleType()` which is also lame.
- */
-
-function createWritableStdioStream (fd) {
-  var stream;
-  var tty_wrap = process.binding('tty_wrap');
-
-  // Note stream._type is used for test-module-load-list.js
-
-  switch (tty_wrap.guessHandleType(fd)) {
-    case 'TTY':
-      stream = new tty.WriteStream(fd);
-      stream._type = 'tty';
-
-      // Hack to have stream not keep the event loop alive.
-      // See https://github.com/joyent/node/issues/1726
-      if (stream._handle && stream._handle.unref) {
-        stream._handle.unref();
-      }
-      break;
-
-    case 'FILE':
-      var fs = require('fs');
-      stream = new fs.SyncWriteStream(fd, { autoClose: false });
-      stream._type = 'fs';
-      break;
-
-    case 'PIPE':
-    case 'TCP':
-      var net = require('net');
-      stream = new net.Socket({
-        fd: fd,
-        readable: false,
-        writable: true
-      });
-
-      // FIXME Should probably have an option in net.Socket to create a
-      // stream from an existing fd which is writable only. But for now
-      // we'll just add this hack and set the `readable` member to false.
-      // Test: ./node test/fixtures/echo.js < /etc/passwd
-      stream.readable = false;
-      stream.read = null;
-      stream._type = 'pipe';
-
-      // FIXME Hack to have stream not keep the event loop alive.
-      // See https://github.com/joyent/node/issues/1726
-      if (stream._handle && stream._handle.unref) {
-        stream._handle.unref();
-      }
-      break;
-
-    default:
-      // Probably an error on in uv_guess_handle()
-      throw new Error('Implement me. Unknown stream file type!');
-  }
-
-  // For supporting legacy API we put the FD here.
-  stream.fd = fd;
-
-  stream._isStdio = true;
-
-  return stream;
-}
-
-/**
  * Init logic for `debug` instances.
  *
  * Create a new `inspectOpts` object in case `useColors` is set

resources/app/node_modules/electron-packager/package.json

@@ -1,33 +1,30 @@
 {
-  "_args": [
-    [
-      "electron-packager@12.0.1",
-      "E:\\vscode\\UseStudio.Desktop\\resources\\app"
-    ]
-  ],
-  "_development": true,
-  "_from": "electron-packager@12.0.1",
+  "_from": "electron-packager",
   "_id": "electron-packager@12.0.1",
   "_inBundle": false,
   "_integrity": "sha1-ZjTtwA65i5jSEglfx2I9lLADCV8=",
   "_location": "/electron-packager",
-  "_phantomChildren": {},
+  "_phantomChildren": {
+    "ms": "2.0.0"
+  },
   "_requested": {
-    "type": "version",
+    "type": "tag",
     "registry": true,
-    "raw": "electron-packager@12.0.1",
+    "raw": "electron-packager",
     "name": "electron-packager",
     "escapedName": "electron-packager",
-    "rawSpec": "12.0.1",
+    "rawSpec": "",
     "saveSpec": null,
-    "fetchSpec": "12.0.1"
+    "fetchSpec": "latest"
   },
   "_requiredBy": [
-    "#DEV:/"
+    "#DEV:/",
+    "#USER"
   ],
   "_resolved": "https://registry.npmjs.org/electron-packager/-/electron-packager-12.0.1.tgz",
-  "_spec": "12.0.1",
-  "_where": "E:\\vscode\\UseStudio.Desktop\\resources\\app",
+  "_shasum": "6634edc00eb98b98d212095fc7623d94b003095f",
+  "_spec": "electron-packager",
+  "_where": "D:\\laragon\\www\\UseStudio.CampusInfo-borwers\\resources\\app",
   "author": {
     "name": "max ogden"
   },
@@ -40,6 +37,7 @@
   "bugs": {
     "url": "https://github.com/electron-userland/electron-packager/issues"
   },
+  "bundleDependencies": false,
   "dependencies": {
     "asar": "^0.14.0",
     "debug": "^3.0.0",
@@ -59,6 +57,7 @@
     "semver": "^5.3.0",
     "yargs-parser": "^10.0.0"
   },
+  "deprecated": false,
   "description": "Customize and package your Electron app with OS-specific bundles (.app, .exe, etc.) via JS or CLI",
   "devDependencies": {
     "ava": "^0.25.0",

resources/app/node_modules/electron-prebuilt/.npmignore

@@ -0,0 +1,8 @@
+dist/
+path.txt
+.npmignore
+.travis.yml
+appveyor.yml
+CONTRIBUTING.md
+issue_template.md
+test/

resources/app/node_modules/electron-prebuilt/.travis.yml

@@ -0,0 +1,13 @@
+os:
+- linux
+- osx
+language: node_js
+node_js:
+- '0.10'
+- '0.12'
+- '4'
+- '5'
+- '6'
+branches:
+  only:
+  - master

resources/app/node_modules/electron-prebuilt/CONTRIBUTING.md

@@ -0,0 +1,7 @@
+releases for this module are handled by https://github.com/johnmuhl/electron-prebuilt-updater
+
+versions published to npm should match the versions published to [github releases for electron](https://github.com/electron/electron/releases)
+
+coding style should be `standard`:
+
+[![js-standard-style](https://raw.githubusercontent.com/feross/standard/master/badge.png)](https://github.com/feross/standard)

resources/app/node_modules/electron-prebuilt/LICENSE

@@ -0,0 +1,7 @@
+Copyright (c) 2015 Mathias Buus-Madsen, Max Ogden and contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

resources/app/node_modules/electron-prebuilt/README.md

@@ -0,0 +1,112 @@
+# electron-prebuilt
+
+[![Travis build status](http://img.shields.io/travis/electron-userland/electron-prebuilt.svg?style=flat)](http://travis-ci.org/electron-userland/electron-prebuilt)
+[![AppVeyor build status](https://ci.appveyor.com/api/projects/status/qd978ky9axl8m1m1?svg=true)](https://ci.appveyor.com/project/Atom/electron-prebuilt)
+
+[![badge](https://nodei.co/npm/electron-prebuilt.png?downloads=true)](https://www.npmjs.com/package/electron-prebuilt)
+
+Install [Electron](https://github.com/electron/electron) prebuilt binaries for
+command-line use using npm. This module helps you easily install the `electron`
+command for use on the command line without having to compile anything.
+
+[Electron](http://electron.atom.io) is a JavaScript runtime that bundles Node.js
+and Chromium. You use it similar to the `node` command on the command line for
+executing JavaScript programs. For more info you can read [this intro blog post](http://maxogden.com/electron-fundamentals.html)
+or dive into the [Electron documentation](http://electron.atom.io/docs).
+
+## Installation
+
+**Note** As of version 1.3.1, this package is published to npm under two names:
+`electron` and `electron-prebuilt`. You can currently use either name, but
+`electron` is recommended, as the `electron-prebuilt` name is deprecated, and
+will only be published until the end of 2016.
+
+Download and install the latest build of Electron for your OS and add it to your
+project's `package.json` as a `devDependency`:
+
+```shell
+npm install electron --save-dev
+```
+
+This is the preferred way to use Electron, as it doesn't require users to
+install Electron globally.
+
+You can also use the `-g` flag (global) to symlink it into your PATH:
+
+```shell
+npm install -g electron
+```
+
+If that command fails with an `EACCESS` error you may have to run it again with `sudo`:
+
+```shell
+sudo npm install -g electron
+```
+
+Now you can just run `electron` to run electron:
+
+```shell
+electron
+```
+
+If you need to use an HTTP proxy you can [set these environment variables](https://github.com/request/request/tree/f0c4ec061141051988d1216c24936ad2e7d5c45d#controlling-proxy-behaviour-using-environment-variables).
+
+If you want to change the architecture that is downloaded (e.g., `ia32` on an
+`x64` machine), you can use the `--arch` flag with npm install or set the
+`npm_config_arch` environment variable:
+
+```shell
+npm install --arch=ia32 electron
+```
+
+## About
+
+Works on Mac, Windows and Linux OSes that Electron supports (e.g. Electron
+[does not support Windows XP](https://github.com/electron/electron/issues/691)).
+
+The version numbers of this module match the version number of the [official
+Electron releases](https://github.com/electron/electron/releases), which
+[do not follow semantic versioning](http://electron.atom.io/docs/tutorial/electron-versioning/).
+
+This module is automatically released whenever a new version of Electron is
+released thanks to [electron-prebuilt-updater](https://github.com/electron/electron-prebuilt-updater),
+originally written by [John Muhl](https://github.com/johnmuhl/).
+
+## Usage
+
+First, you have to [write an Electron application](http://electron.atom.io/docs/tutorial/quick-start/).
+
+Then, you can run your app using:
+
+```shell
+electron your-app/
+```
+
+## Related modules
+
+- [electron-packager](https://github.com/electron-userland/electron-packager) -
+  Package and distribute your Electron app with OS-specific bundles
+  (.app, .exe etc)
+- [electron-builder](https://github.com/electron-userland/electron-builder) -
+  create installers
+- [menubar](https://github.com/maxogden/menubar) - high level way to create
+  menubar desktop applications with electron
+
+Find more at the [awesome-electron](https://github.com/sindresorhus/awesome-electron) list.
+
+## Programmatic usage
+
+Most people use this from the command line, but if you require `electron` inside
+your **Node app** (not your Electron app) it will return the file path to the
+binary. Use this to spawn Electron from Node scripts:
+
+```javascript
+var electron = require('electron')
+var proc = require('child_process')
+
+// will print something similar to /Users/maf/.../Electron
+console.log(electron)
+
+// spawn Electron
+var child = proc.spawn(electron)
+```

resources/app/node_modules/electron-prebuilt/appveyor.yml

@@ -0,0 +1,25 @@
+build: off
+
+branches:
+  only:
+    - master
+
+environment:
+  matrix:
+  - nodejs_version: "0.10"
+  - nodejs_version: "0.12"
+  - nodejs_version: "4"
+  - nodejs_version: "5"
+  - nodejs_version: "6"
+
+skip_tags: true
+
+install:
+  - ps: Install-Product node $env:nodejs_version
+  - npm install npm
+  - .\node_modules\.bin\npm install
+
+test_script:
+  - node --version
+  - .\node_modules\.bin\npm --version
+  - .\node_modules\.bin\npm test

resources/app/node_modules/electron/dist/LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2013-2017 GitHub Inc.
+Copyright (c) 2013-2016 GitHub Inc.
 
 Permission is hereby granted, free of charge, to any person obtaining
 a copy of this software and associated documentation files (the